skydoc_17 Posted June 17, 2009 Share #1 Posted June 17, 2009 (edited) I will be at the Skid In this year and will have tools and equipment as well as parts for the Needle Mod, Carb. Diaphragm Replacement, Radiator Drain Upgrade, Replacement Side Cover Pins, Fuse Box Upgrade Kits and Carb. Syncs. As time permits I am willing to help any member Install any of these mods on a first come first served basis. If you are interested in having any work done please post here and you will be at the top of the list. I will make sure that I have all of the parts and tools with me to do the very best job possible. It is a pleasure to work on the bikes belonging to the members of this site and who wouldn't like to ride their bike home in better condition than when they rode it there. Earl Edited June 17, 2009 by skydoc_17 Link to comment Share on other sites More sharing options...
Yammer Dan Posted June 17, 2009 Share #2 Posted June 17, 2009 Maybe I could just leave mine there.....:rotfl: Link to comment Share on other sites More sharing options...
FROG MAN Posted June 17, 2009 Share #3 Posted June 17, 2009 I could use that needle mod. Maybe I can trailer a couple down. Link to comment Share on other sites More sharing options...
dave_wells Posted June 18, 2009 Share #4 Posted June 18, 2009 I would like any help you can provide me on this topic while down there while I pull my trailer the mileage is about the same as my Chevy Blazer If you think any of you fixes will do it count me in I arrive on Thursday.... Link to comment Share on other sites More sharing options...
Skid Posted June 18, 2009 Share #5 Posted June 18, 2009 there should be plenty of time to work on the bikes Thursday evening, Friday morning, or Friday evening after the ride too..... Link to comment Share on other sites More sharing options...
1rooster Posted June 18, 2009 Share #6 Posted June 18, 2009 I will be at the Skid In this year and will have tools and equipment as well as parts for the Needle Mod, Carb. Diaphragm Replacement, Radiator Drain Upgrade, Replacement Side Cover Pins, Fuse Box Upgrade Kits and Carb. Syncs. As time permits I am willing to help any member Install any of these mods on a first come first served basis. If you are interested in having any work done please post here and you will be at the top of the list. I will make sure that I have all of the parts and tools with me to do the very best job possible. It is a pleasure to work on the bikes belonging to the members of this site and who wouldn't like to ride their bike home in better condition than when they rode it there. Earl 100 (one hundred) miles per tank of gas on the 86.Mine needs something.I will be there Saturday morning. Link to comment Share on other sites More sharing options...
skydoc_17 Posted June 18, 2009 Author Share #7 Posted June 18, 2009 Hey Dan, Until you get back on your feet, I would willing to come to your house and do any work you need done on ANY of your bikes! Even though you can't ride well yet it would be great to see you at the Skid-In! Earl Link to comment Share on other sites More sharing options...
Yammer Dan Posted June 18, 2009 Share #8 Posted June 18, 2009 It may be in the Wheel Barrow but I will be there!! Warden don't like pushing that thing!!! Link to comment Share on other sites More sharing options...
cecdoo Posted June 18, 2009 Share #9 Posted June 18, 2009 Hey Dan, Until you get back on your feet, I would willing to come to your house and do any work you need done on ANY of your bikes! Even though you can't ride well yet it would be great to see you at the Skid-In! Earl Now that is one heck of an offer,way to go Earl:thumbsup: Craig Link to comment Share on other sites More sharing options...
RTR Posted June 18, 2009 Share #10 Posted June 18, 2009 Earl, please add my 87 VR to list. low mpg... thx Bob:12101: Link to comment Share on other sites More sharing options...
Yammer Dan Posted June 18, 2009 Share #11 Posted June 18, 2009 Thanks Earl I could keep you busy for a while with all the parts I have tucked away. I would like to see someone that knows what they are doing with them clean a set of carbs. Maybe one of these days we could have a show & tell on it if someone had a single carb already out of the rack but then that would need a class on how to remove and put them back. And one on how to get ready to remove and then one on how to get them back in sync and one on ........ it just keeps on and on. Link to comment Share on other sites More sharing options...
mini-muffin Posted June 18, 2009 Share #12 Posted June 18, 2009 Jeff said he has a set of carbs if you want him to bring them to show how to do whatever you listed let us know. Margaret Link to comment Share on other sites More sharing options...
skydoc_17 Posted June 18, 2009 Author Share #13 Posted June 18, 2009 I am SURE that there will be more than one person that would like to see the "Master" at work on a bank of First Gen. Carbs! I personally would pass on the Sat. Ride just to watch him "do his magic" on a set of Carbs! Thank you Mini and Muffinman. Earl Link to comment Share on other sites More sharing options...
Eck Posted June 18, 2009 Share #14 Posted June 18, 2009 Wish I could make it Skid, but I cant get the extra time off work. If I was able to make it, all I would want for MD, is a good wash and wax job while I eat a large DQ as it is being done........ Link to comment Share on other sites More sharing options...
Sleeperhawk Posted June 19, 2009 Share #15 Posted June 19, 2009 Wish I could make it Skid, but I cant get the extra time off work. If I was able to make it, all I would want for MD, is a good wash and wax job while I eat a large DQ as it is being done........ Heck, with all that plastic, just run it through a car wash. Link to comment Share on other sites More sharing options...
Eck Posted June 19, 2009 Share #16 Posted June 19, 2009 Heck, with all that plastic, just run it through a car wash. Your killin me........ Im gonna turn all your carb screws......and listen to that cassette player for a while.... Link to comment Share on other sites More sharing options...
skydoc_17 Posted June 19, 2009 Author Share #17 Posted June 19, 2009 Hey Eck, On the wings, I thought you could just put the top up and drive right thru the car wash! Just Kiddin' Bro, Earl Link to comment Share on other sites More sharing options...
KAWoodworth Posted June 19, 2009 Share #18 Posted June 19, 2009 I got a Morgan Carbatune a while back and would really like to have some one show me how to set it up and do a carb sync on my 2007 2nd gen. Link to comment Share on other sites More sharing options...
Skid Posted June 19, 2009 Share #19 Posted June 19, 2009 I got a Morgan Carbatune a while back and would really like to have some one show me how to set it up and do a carb sync on my 2007 2nd gen. I got one here but I'm sure there will be others. Bring it with you and someone will assist with it..... Link to comment Share on other sites More sharing options...
Yammer Dan Posted June 19, 2009 Share #20 Posted June 19, 2009 I got one here but I'm sure there will be others. Bring it with you and someone will assist with it..... No Problem. Link to comment Share on other sites More sharing options...
Skid Posted June 20, 2009 Share #21 Posted June 20, 2009 No Problem. Going to have plenty of room, I got more of the garage cleaned out this year. Link to comment Share on other sites More sharing options...
cecdoo Posted June 20, 2009 Share #22 Posted June 20, 2009 Going to have plenty of room, I got more of the garage cleaned out this year. If you can get it cleared out from one end to the other, we could have 1/8th mile drag races in there Sat. nite:big-grin-emoticon: Craig Link to comment Share on other sites More sharing options...
Yammer Dan Posted June 20, 2009 Share #23 Posted June 20, 2009 If you can get it cleared out from one end to the other, we could have 1/8th mile drag races in there Sat. nite:big-grin-emoticon: Craig I'll bring Lil'Red for that!!!:rotfl: Link to comment Share on other sites More sharing options...
Guest HdHtr Posted June 20, 2009 Share #24 Posted June 20, 2009 I could use some help with a valve cover gasket ... bike shakes so much I need help getting the wrench on the bolts!! Or is it me shaking? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now