Mountaineer47

I have a 2008 Venture. I am considering doing the Marshal Mod. The instructions refer to keeping the current two antenna set up. Can the AR-1A splitter be used to convert to a one antenna system on the 2nd generation Ventures?

I have finished going through all of the posts for the generation 2 Venture. I have a 2008 model. From my readings and to keep from reopening some threads that have been unused for a while, here are my questions: 1. Reference to tires. On my previous bike, 2008 Kawasaki Vulcan 900 classic LT, it came with Dunlop tires. The wear rate on them sucked. I was only getting about 8000 miles or so out of a set. Switched to metzlers ME 880 and was well into my second year of riding on the same tires before I traded it for my current bike. Having read the threads here, I see some have had issues with the Metzlers. I did not on previous bike and current bike has a set of metzler's ME 880's on it. My question. Is there any issues with the tires? I run them on 40 lbs air in the front....42 in the rear. 2. I know I have screwed up my stereo system. The head unit works, but I have no sound. All fuses are fine. My question. Has anyone dealt with Pinwall Cycle Parts? The have a used stereo I can get to replace my current unit. I am aware that my current system is under warranty. However, don't feel like waiting through a long process for them to get around to replacing the unit. My only concern is their no exchange policy. 3. Another audio question. What year's of the bike use the same audio system? From looking at Pinwall's selection, they all basically seem to be the same size, ect....is there any difference between say a 1999 model and 2008 model stereo? That's all for now. Thanks!

which fuse are you referring to? The unit powers up. I can change channels, adjust settings....ect..... Is there a fuse for the amp itself?

Thanks for the input.....one day when I have the time.... that will be another project....removing the cassette player.....

I need help. I was installing my wolo horn on my bike in the original horn location. I used the ground location behind for my ground. During preliminary tests, the ground was not tightened. The stereo was on. Long story short, I now have no audio, speaker or headset. Up to final assembly, stereo had worked. Did I fry my amp under the fairing? How much is that to replace?

Ok, on a 2008 Venture, how much is involved in removing the fairing cover? I have seen the allen head bolts around the inside...do I have to remove the chrome trim on the front? The windshield? If so, how is that done? Thanks!