Jump to content

etcswjoe

Supporting Member
 View Profile  See their activity

  • Posts

    5,033

  • Joined

  • Last visited

  • Days Won

    21

Everything posted by etcswjoe

  1. etcswjoe
    Don't do too many burnouts on the Venture
  2. etcswjoe
    I had this issue after I adjusted my floats and it turned out I had messed one up.
  3. etcswjoe
    If you stay out of Myrtle Beach itself it is not bad, Myrtle beach proper is not bike friendly especially during bike week. I am not much on the traffic either it will take you a good hour to go from one end to the other and since I live just down the road may be another reason. If several folks are coming down I may go up for a meet and greet Murrell's Inlet had some good things going last year and North Myrtle is not too bad.
  4. etcswjoe
    I avoid Myrtle Beach at all cost.
  5. etcswjoe
    Morning, Here is a link to the wiring diagram if you do not already have it. http://www.venturerider.org/forum/showthread.php?t=42357 I will look when I get home too and see if I can come up with some ideas for you.
  6. etcswjoe
    Someone told me I spoil my grandkids but I told them they always smelled that way.
  7. etcswjoe
    You can also make your own just using a inexspenvive Radio Shack mic check out this thread, however for safety reasons I do not reccommend a handheld mic. I posted pics towards the end with the diagram. http://www.venturerider.org/forum/showthread.php?t=59362
  8. etcswjoe
    Let us know how it works
  9. etcswjoe
    Mike, Did not have any porblems at all but it had a NC title to start with. Glad you found one.
  10. etcswjoe
    Sending you a PM.
  11. etcswjoe
    South Carolina does not require plates unless you are traveling outside the state. The plate is 75 bucks and is indefinite.
  12. etcswjoe
    My prayers go out to you.
  13. etcswjoe
    The mic will still work just make sure you do not short the speaker wires when you cut them. Remember the intercom does not go through the speakers.
  14. etcswjoe
    Welcome, hope you enjoy the bike there are a few other members down your way too.
  15. etcswjoe
    Did you ever get a response? I am curious becasue I have one still in the box I would like to get rid of.
  16. etcswjoe
    Prayers to you and the family.
  17. etcswjoe
    Glad you are ok.
  18. etcswjoe

    Found it

    etcswjoe replied to Skid's topic in Watering Hole

    Looks like Rich Valley Road back home.
  19. etcswjoe
    You have to take out the screw from the back cover to release the front cowling once you take out the screws in the front but you do not remove the back cover.
  20. etcswjoe
    I just went through this and I have no clue how it got bent unless I did it myself while cleaning. I bit the bullet and paid 40 bucks for a new plunger. STARTER SET 1146125
  21. etcswjoe
    Morning, I am not sure which clip you are talking about. To take off the lower cowling there are three screws you have to remove two in front one in back then take out the little plastic pin underneath right at the joining point of the cowlings (use a #1 phillips head) then gently pull out the cowling from the gromet.
  22. etcswjoe
    There are a couple in Tidewater, however I think someone just wants to ride to the mountains.
  23. etcswjoe
    That will work, go ahead and set the next target good to be moving again.
  24. etcswjoe
    No takers on this yet?
  25. etcswjoe
    Looks good are you going to get rid of the radio stuff?
×
×
  • Create New...