Jump to content

okiefirefighter

Expired Membership
  • Posts

    42
  • Joined

  • Last visited

Everything posted by okiefirefighter

  1. Is that the brace between the 2 forks...and do I need one? You guys talked me into the Progressives, and the battery cable ugrade so why stop now? Kevin
  2. Thanks guys for all the ideas. I will tackle it later this week. Kevin
  3. What about drilling a hole in the threaded cap? Would that work? Kevin
  4. They say that even a blind hog find the corn every once in a while! I just got lucky. Kevin
  5. Disregard my ignorance. I figured it out! Kevin
  6. I replaced the battery and the new one has a threaded filler cap and is to large for the wire that tells you when the water is low. What can I do? Thanks, Kevin
  7. I took the forks off to have them rebuilt and now I need to know if the drive unit goes in front or behind the forks? Thanks, Kevin
  8. Are the bushes in the forks? Kevin
  9. I am rebuilding the forks on my '87 VR and I am going to replace the springs with with Progressives. I found them on Dennis Kirks's for $77.99. Should I order seals also? My front brake pads are soaked with fork oil and I don't know what kind to replace them with. My questions are: What weight oil? How much oil? What kind of brake pads? Thanks, Kevin
  10. I have read that everyone says to put on a set of Progressive springs on the front. I am going to have my forks rebuilt and I wanted to know if this is the time to install them? They go inside of the fork tubes right? Does anyone know where I can get a set and what the part number is? Can I still use the air suspension? Thanks, Kevin
  11. It is where the air hoses connect at the top. Kevin
  12. Ok, I took the airhoses loose and now I can't figure how to get the air hose connections off to slide the forks out. I need help!!!!!! Thanks, Kevin
  13. Do the air hoses on the front forks unscrew out of the forks? Thanks, Kevin
×
×
  • Create New...