Jump to content

Mark Koontz

Expired Membership
 View Profile  See their activity

  • Posts

    14

  • Joined

  • Last visited

Reputation

10 Good

About Mark Koontz

  • Birthday 03/07/1958

Personal Information

  • Name
    Mark Koontz

location

  • Location
    Wichita, United States

Converted

  • City
    Wichita

Converted

  • Home Country
    United States

Converted

  • Bike Year and Model
    '03 Silverado (right now)
  1. Mark Koontz
    First, I need new tires... What is your recommendation for brand? Second, Is it possible to go to 150 on the back? Is there anything to be gained by that change? Thanks, Mark Koontz '83 Venture Wichita, KS:680:
  2. Mark Koontz
    I agree, the rear isn't worth thw trouble- Also, the "new" front rotor ARE a little bit smaller in diameter. But the calipers are MUCH bigger and the disks have slot in them (but not the hollow design the the early ones). I'm making the switch because I wanted better brakes. I had such poor spongy brakes (when I got the bike), I didn't want the anti-dive contributing to the hydraulic problems. I'm also dumping the split brake system (for the simplified "regular" brake system used on most bikes. My system "part" are based off the RoyalStar brake system. PS- Is there no "fuel level" gauge on the Venture (plain wrap)? Thanks, Mark Koontz '83 Venture Wichita, KS
  3. Mark Koontz
    No- I'm broke, man. Does anybody have a "center section" they would be willing to part with? (I'm trying to get ready for Star Days in July) Thanks, Mark Koontz '83 Venture Wichita, KS:Venture:
  4. Mark Koontz
    I think you might be right, Randya- There's no "cut-backs" in my system. And I now think those recieving parts are broken off. Do you think there's some kind of heater hose (flexible) that I could slide over the outside of this joint? I'm trying to button it up without taking this exhaust out of the bike... After all, I don't know what I might run into- Thanks, mk.
  5. Mark Koontz
    I just put on the '87 fork legs on my '83. But one is leaking oil out the little drain screw. [The bike isn't even off the stands yet!] Are these screws supposed to have any little gasket washers on them? Thanks, Mark Koontz '83 Venture Wichita, KS
  6. Mark Koontz
    I'm asking about the '83 Venture (v-4). Thanks, mk.
  7. Mark Koontz
    I can't see how this connection is supposed to happen (front pipes). (My bike came to me with fiberglass fabric and rolled-around shim material.) My center-section (cross-over) maybe incomplete, but it comes forward about 1.5 inches intil a slight bead (and no further). The pipes come down and butt against the little stub pipe. I just bought the (fiber?) sleeves and new outside clamps... But the sleaves seem too small to go over the beads on the center section. What am I missing here? HELP? Thanks, Mark Koontz '83 Venture Wichita, KS
  8. Mark Koontz
    Some months ago I was asking about this swap- I am nealy complete now but need some advice on wiring the (electric) anti-dive soleniods to work. Do I simply use the brake switch to feed them 12V? Do I setup a relay? Do they need a different voltage? Any help is deeply appreciated, Mark Koontz '83 Venture Wichita, KS
  9. Mark Koontz
    Can someone tell me where the fuel fitler is supposed to be? I don't see one on my '83. Thanks, Mark Koontz (Wichita, KS)
  10. Mark Koontz
    Does anybody know if a V-max exhaust system will fit an early venture? Thanks, mk.
  11. Mark Koontz
    I will buy the right fairing piece. PayPal? Total to Kansas? Thanks, Mark Koontz 1229 Threewood St Wichita, KS 67235
  12. Mark Koontz
    Hi There- I need a the right fairing half (outside). Does it have most of it's tabs? Thanks, cost sounds OK. But physical condition? Let me know,
  13. Mark Koontz
    I'm surprized no one has said "under the fairing.":scratchchin: The Victory Vision has 2, 3 gallon tanks up under the fairing about even with the tripple trees. Has anybody really put the '89 front end on an early venture? Thanks, Mark Koontz (Wichita)
  14. Mark Koontz
    1) Do you see any way to enlarge the gas tank (or carry another one somewhere)? I would really like 6-7 gallon total capacity. 2) Front suspension seems real complicated with anti-dive, split brakes, small calipers, and I'm not too wild about the 18" skinny wheel. Can this be simplified allot (somehow)? I just bought a 1st gen and I'm looking to modernize & simplify it. Thanks, Mark Koontz (Wichita) PS- Also looking for driver floorboards.
×
×
  • Create New...