Freebird

Never tried it or even thought about it. I've had a couple of RSVs that I put the Corbin backrest made for the RSV on. My wife liked them. Somewhat similar to that one.

Luvmy40 is correct of course. You can't take them apart without destroying them but it is typically just the o-ring and doesn't require disassembly.

They made a great hitch. They were a bit overpriced and we had a member here that started making them. They were just as good and much cheaper. I don't think he makes them any longer though.

Hello MaxQ, Welcome to Venture Rider. Please feel free to browse around and get to know the others. Please introduce yourself so that our members can get to know you. If you have any questions please don't hesitate to ask. This thread is primarily for introductions. If you have specific questions about your bike, you will get more responses if you post them in the correct forum. MaxQ joined on the 06/02/2022. View Member

Hello Elkonastick, Welcome to Venture Rider. Please feel free to browse around and get to know the others. Please introduce yourself so that our members can get to know you. If you have any questions please don't hesitate to ask. This thread is primarily for introductions. If you have specific questions about your bike, you will get more responses if you post them in the correct forum. Elkonastick joined on the 05/31/2022. View Member

Hello rrichards, Welcome to Venture Rider. Please feel free to browse around and get to know the others. Please introduce yourself so that our members can get to know you. If you have any questions please don't hesitate to ask. This thread is primarily for introductions. If you have specific questions about your bike, you will get more responses if you post them in the correct forum. rrichards joined on the 05/31/2022. View Member

Looks good. He definitely made the best looking one.

Copied to tech library.

Never tried them. I actually like my heel hanging over the back of the highway pegs. It's the first thing that drags in aggressive curves.

Hello Kamm, Welcome to Venture Rider. Please feel free to browse around and get to know the others. Please introduce yourself so that our members can get to know you. If you have any questions please don't hesitate to ask. This thread is primarily for introductions. If you have specific questions about your bike, you will get more responses if you post them in the correct forum. Kamm joined on the 05/27/2022. View Member

Hello Da Cat in Da Hat, Welcome to Venture Rider. Please feel free to browse around and get to know the others. Please introduce yourself so that our members can get to know you. If you have any questions please don't hesitate to ask. This thread is primarily for introductions. If you have specific questions about your bike, you will get more responses if you post them in the correct forum. Da Cat in Da Hat joined on the 05/26/2022. View Member

Hello Bulldog, Welcome to Venture Rider. Please feel free to browse around and get to know the others. Please introduce yourself so that our members can get to know you. If you have any questions please don't hesitate to ask. This thread is primarily for introductions. If you have specific questions about your bike, you will get more responses if you post them in the correct forum. Bulldog joined on the 05/26/2022. View Member

Hello JayFromPA, Welcome to Venture Rider. Please feel free to browse around and get to know the others. Please introduce yourself so that our members can get to know you. If you have any questions please don't hesitate to ask. This thread is primarily for introductions. If you have specific questions about your bike, you will get more responses if you post them in the correct forum. JayFromPA joined on the 05/26/2022. View Member

Well, there was just no easy way to do it. There is a "shelf" sort of thing about 1/4 - 1/2 inch down inside the fill spout. No way to get anything in the tank to suction it out. So the bad news is that I had to take it apart to remove the tank. I think I got all the grass out of it. Then rinsed it very well with water and then put about a half gallon of gas in it and sloshed it around really good to get as much of the water out that could. Then put it all back together. The good news is that it wasn't nearly as bad as I had imagined. I still need to pick up a new filter tomorrow. Now I just need to clean this thing up. It's really nasty.

OK...I screwed up. Late last summer I bought a new John Deere X380 mower. Somehow, either I left it off or didn't tighten it, I found that the gas cap was off and the tank apparently got a lot of grass in it. It will run about 10 or 15 minutes and then I have to remove the fuel line and blow through it to get it to run another 10 or 15 minutes. It appears that the only way to get the grass out of it is to remove the tank which is a major ordeal. I think that is what I will have to do but thought I would ask here to see if any of you have another solution.

Hello bumbleberry02, Welcome to Venture Rider. Please feel free to browse around and get to know the others. Please introduce yourself so that our members can get to know you. If you have any questions please don't hesitate to ask. This thread is primarily for introductions. If you have specific questions about your bike, you will get more responses if you post them in the correct forum. bumbleberry02 joined on the 05/25/2022. View Member

Very nice. Great handling, low center of gravity, tons of torque.

Hello Bldbill, Welcome to Venture Rider. Please feel free to browse around and get to know the others. Please introduce yourself so that our members can get to know you. If you have any questions please don't hesitate to ask. This thread is primarily for introductions. If you have specific questions about your bike, you will get more responses if you post them in the correct forum. Bldbill joined on the 05/24/2022. View Member

Hello iamtroyreed, Welcome to Venture Rider. Please feel free to browse around and get to know the others. Please introduce yourself so that our members can get to know you. If you have any questions please don't hesitate to ask. This thread is primarily for introductions. If you have specific questions about your bike, you will get more responses if you post them in the correct forum. iamtroyreed joined on the 05/23/2022. View Member

Hello floydiangfc, Welcome to Venture Rider. Please feel free to browse around and get to know the others. Please introduce yourself so that our members can get to know you. If you have any questions please don't hesitate to ask. This thread is primarily for introductions. If you have specific questions about your bike, you will get more responses if you post them in the correct forum. floydiangfc joined on the 05/23/2022. View Member

Hello Bthomps01, Welcome to Venture Rider. Please feel free to browse around and get to know the others. Please introduce yourself so that our members can get to know you. If you have any questions please don't hesitate to ask. This thread is primarily for introductions. If you have specific questions about your bike, you will get more responses if you post them in the correct forum. Bthomps01 joined on the 05/22/2022. View Member

Hello Cuttmysta, Welcome to Venture Rider. Please feel free to browse around and get to know the others. Please introduce yourself so that our members can get to know you. If you have any questions please don't hesitate to ask. This thread is primarily for introductions. If you have specific questions about your bike, you will get more responses if you post them in the correct forum. Cuttmysta joined on the 05/22/2022. View Member

Hello Idiot Savant, Welcome to Venture Rider. Please feel free to browse around and get to know the others. Please introduce yourself so that our members can get to know you. If you have any questions please don't hesitate to ask. This thread is primarily for introductions. If you have specific questions about your bike, you will get more responses if you post them in the correct forum. Idiot Savant joined on the 05/22/2022. View Member

Hello Eddieed317, Welcome to Venture Rider. Please feel free to browse around and get to know the others. Please introduce yourself so that our members can get to know you. If you have any questions please don't hesitate to ask. This thread is primarily for introductions. If you have specific questions about your bike, you will get more responses if you post them in the correct forum. Eddieed317 joined on the 05/21/2022. View Member