Jump to content

etcswjoe

Life Member
  • Posts

    5,042
  • Joined

  • Days Won

    22

Everything posted by etcswjoe

  1. I ordered new stock ones, I had the screws come loose when I replaced my first one (that is how I knew about the buzz) I either did not let the Loctite cure or I did not clean the holes out good enough. I cleaned the holes out and waited 24 hours before I reassembled everything and good to go.
  2. A member smarter than me shared that the part numbers translate to the size on most screws and bolts, the stator screw part number is 98507-06035-00 so the "06" is 6mm diameter the "35" is 35mm long.
  3. Does it sound like a buzz? If so one or more of the bolts are loose.
  4. Cannot tell about the drain plug the whole area looks very wet, at the first part of the video it looks like you are sucking in air at the top of the carb boots make sure they are tight but be careful not to strip the screws out.
  5. Too bad it does not work on the actual bike
  6. He is talking to you Steve @eagleeye
  7. Only Mcaffe, Norton does not see it as a threat will have to check it out. Thanks!
  8. My Antivirus, threw up a warning about going to their page.
  9. I believe you are correct.
  10. We stopped at a place next to the Sunoco in Cleveland called Burly Bob's or something like that, just a trailer and some picnic tables was pretty good. Will have to look for the Lady in the RV next time we are up that way.
  11. Discussing types of BBQ is almost as controversial as oil and tires
  12. I borrowed one and the lugs are a little small for the wires so I ended up using pliers to finish it.
  13. Rode through there this weekend, will have to check them out next time, sounds like a good place to have a M&E at. We must have caught this place on a bad day, will have to try it again
  14. I think I got it on sale and Rick's gave me a big break on the replacement one. Be careful when you crimp the pins that is what I messed up on.
  15. Len's tape is clear and colored tape you use to temporaly repair a taillight on a vehicle, most auto parts stores have red, amber and clear but you can get other colors. Here is a link to a place on amazon that sells them http://www.amazon.com/Headlights-Lights-Vinyl-Adhesive-Frozen/dp/B00CCSD92O/ref=sr_1_6?s=automotive&ie=UTF8&qid=1456314978&sr=1-6&keywords=spray+tint, you could also try spray tint.
  16. Thanks for the info, I just bought two connectors one directly from Rick's motorsports after I screwed up the one I bought from Dennis Kirk.
  17. Macon is not that far of a ride from SC either.
  18. You can see it here waiting to pounce.
  19. Was not bad in SC over the weekend, did not get as warm as expected but we did get to celebrate @Skid 's birthday at Carolina Ale House in Columbia and a Red Velvet Cake Blizzard at DQ.
  20. Will keep him in our thoughts and prayers.
  21. Welcome to the mad house , I think you will really enjoy the first gen 38K is nothing for them, check all the rubber and change all the fluids one of the first gen gurus can give you some more specific tips. We have several get together during the year check out the rides and rallies section and come meet up with some fellow Venture owners. http://www.venturerider.org/forum/forumdisplay.php?17-Rides-and-Rallies
  22. They are fun to mess with, I have been called several nice names by "John Smith from Microsoft" , the bad part is people that don't know any better fall for this crap.
  23. Happy Cherry Pie Day !!! We celebrated your birthday at the Ale House but we did even better than the Red Velvet Cake, we had Red Velvet Cake Blizzards!!
  24. In our prayers for a speedy recovery.
×
×
  • Create New...