Jump to content

Cougar

Expired Membership
  • Posts

    3,845
  • Joined

  • Last visited

Everything posted by Cougar

  1. email Earl, (skydoc) the cost is $109.00 shipped make sure you tell him for a 2nd Gen. http://www.venturerider.org/forum/sendmessage.php?do=mailmember&u=4738 I still do not have the part number and it is a MOSFETs R/R. made by SHINDENGEN you can search and find there site , they have tons of them. I think I found it on there site , but I still dont know the part number. so I just had earl order it for me. might be able to find it for a little less tho.. not sure. IF you find any info more then I have please let me know. Thanks, Jeff
  2. What the heck are these two little brass parts used for that came off the red cap on the Deka Battery All I used was the bolts like I always have in the past. [ATTACH]64695[/ATTACH]
  3. Wonder if this a MM thing..
  4. Mine had frayed so bad it stopped turning. found the problem and got new cable this was about 5 years ago. it only had like one thread left on the cable. there was a photo of it on here but I think it was before the BIG CRASH of this site back then. Jeff
  5. I must say this JOB is compleat... New Buckeye Stator and R/R from SkyDoc. I now have all kinds of power with everthing on I am sitting at 14.3 volts and with lights turned off I am at 14.8 volts.... never had that before. Also never had two green bars on my led meter. Pics of the battery bug and the new R/R plug and play. Difficulty of this Stator install is about 7.5 lots to do. Difficulty if the new R/R install 1.0 simple. New R/R are on the right in the photo's. Jeff [ATTACH]64639[/ATTACH] [ATTACH]64640[/ATTACH] [ATTACH]64641[/ATTACH] [ATTACH]64642[/ATTACH] [ATTACH]64643[/ATTACH]
  6. djh3, to answer your question. sorry I didn't notice your post before.... but with the newer HO Stator it is pumping put more juice and that plug can/could fry.. not worth the hassle and worry over it. I just soldered mine today and it was very easy. and also the old pugs were filthy dirty and wonder if that why I might have had some output issue's in the passed. Rick also recommends the wires to be soldered as well. I will post the overall about it when I get this finished someday this week. Jeff
  7. Finely got the Stator today and went to work. Rick has just enough EXTRA wire length on there to solder everything in place in the battery area and then tuck it away, I now have it all soldered and the covers back in place, all that is left is the muffler and the battery area and the side covers etc. Added the new R/R so we will see how that does along with the new HO Stator. not sure how the bike ran with those above pictures of the Old Stator plugs how darn dirty they had gotten. Anyways I have tons of photos for somebody LOL Can't wait to get the bike fired up. Jeff
  8. Beautiful
  9. So how to you make them stay large, with out clicking on them to make them large start out at a lower pixal rate?
  10. Ken, Thanks for reminding me about the Ropers.. been wanting a pair for a long time now and forgot to order them last year. I hear there awesome. what model did you get? Jeff
  11. My head Hurts Now ,going to take nap... Been messing with this for 2 days now...... DONE !!
  12. Kevin will this one make the wig wag for both sides? I am also thinking that I am liking it better blinking at the same time :shock3:LOL http://www.swps.com/whelheadflas.html Thanks, Jeff
  13. Kevin, that looks very intersting. Thanks for the links. Jeff
  14. Mike here is the link.. I hope it helps, just added to the LED install. http://www.venturerider.org/forum/showthread.php?p=660437#post660437 Jeff
  15. This set up takes two 30 amp relays. (FOR SECOND GEN) Plug to PIN 30 in both relays to the single duel blue wires on harness (power) Plug to First relay PIN 86 to the BROWN wire on harness Plug to Second relay PIN 86 to the GREEN wire on the harness Plug to First relay PIN 87A to the (mine was) YELLOW LED SIDE MARKER and tie into the blue wire running to the running light /blinker front light (both togeter) Plug to Second relay PIN 87A to the (mine was) YELLOW LED SIDE MARKER and tie into the other blue wire running to the running light /blinker front light (both togeter) Ground to PIN 85 on both Relays. Here are some pictures (not in order) will try and fix later. Hope it makes since. Jeff [ATTACH]64583[/ATTACH] PIN 87A X2 [ATTACH]64584[/ATTACH] PIN 30 x's 2 each relay (where my thumb is , that is the same wire had to make it longer) The two wires wont be used. [ATTACH]64585[/ATTACH] PIN 86 Brown and Green ( left and right seperate relay ) (not together) Right is GREEN Left is BROWN [ATTACH]64586[/ATTACH] PIN 86 IS GROUNDED (black wire) [ATTACH]64587[/ATTACH] The Mess Enjoy Jeff
  16. ALL WHITE mabey a tad of blue and a black in there.
  17. Sure Mike, Will try and post my MESS soon LOL:D and thanks.
  18. I have decided to just stay with them blinking at the same time. way to much trouble and I think I like it better this way anyway .. makes me kinda dizzy watching them :puzzled:Opposed All DONE! Jeff
  19. got the opposing blink now. now just to get the top lit, will get it figured out tho I hope.
  20. Yeah Larry, it also works with the left/right blinkers as well.. BUT hold off a little as I am trying to make them blink opposite. LOL front and sides. still playing with it a bit more. after I am done I will try and write down all the connections for you. Keep in mind that this install will take (2) Relays. Heck you ARE the RELAY MASTER tho. Jeff
  21. here is another one after I had it more perfected in the dark. Sorry for the movment on the video, had my laft and on the cam and the right hand on the key and turn signal switch . Man I hate relays :rotf:I have four under the fairing now. what a wire jungle in there now.
  22. :scratchchin:Ummm, Well I guess I could... now there is a how to on the LED light install , but it is not in the tech section.. not sure if Don wants to add it or not.. here is that link.. the 2nd part would be the RELAYS for them (2) for each light. http://www.venturerider.org/forum/showthread.php?t=67183 Jeff
×
×
  • Create New...