s.tyler58

Mine too. My bolt won't budge. Nothing cracked. Sent from my SM-G935V using Tapatalk

I have a brand new set of progressives for a 1st gen. in an unopened box! PM me and you can have them at cost. Free ship. I'll find my receipt. Sent from my SM-G935V using Tapatalk

I have a doctor friend who competes in BBQ competition in Kansas City every summer. They named their team, "Last Year's Champs". Sent from my SM-G935V using Tapatalk

A new goal for my bucket list! You're Superman! Sent from my SM-G935V using Tapatalk

Thanks everyone! Good thing I hung onto my trusty sleeping bag! I guess the search for parts continues... Sent from my SM-G935V using Tapatalk

Clueless Sent from my SM-G935V using Tapatalk

"I replaced my anti-dives with cover plates " Where did you get your cover plates? Sent from my SM-G935V using Tapatalk

Good thought! Thank you. I just put Barnett heavy duty springs in it before I got it all running this spring. Sent from my SM-G935V using Tapatalk

Just ordered from Barnett. I still need to look up the gasket # Now I'm excited to get home and see if I can get the fork seal cleaned. Those seals aren't that old and I wasn't thinking about bugs on forks once I did get this labor of love on the road. Sent from my SM-G935V using Tapatal

So, IF I can find a strip of film to use, do I just work it down in between the fork and the top of the rubber seal and and work around! I do not have a single package of printed photos to steal a negative from in my house! Sent from my SM-T580 using Tapatalk

Those are what I have and I get a lot of compliments on how good bike sounds. Sent from my SM-T580 using Tapatalk

They were just redone 3 years ago less less than 3,000 miles Sent from my SM-G935V using Tapatalk

And I need to get my shifter linkage length dialed-in. Right now I believe the adjustment screw is as short as it can go and so there's a lot of slop and it's hard to get into first year by shifting down with my heel. Remember that I have a reverse shift pattern. Sent from my SM-G935V using Tapatalk

The pull is fine. It slips like a beast. I can hold highway speeds just fine. I have developed a new habit of driving around 60 miles an hour at around 36 3700 RPM instead of 32 hundred. But in 5th gear 65 miles an hour and then go full throttle. Tach jumps up, speedometer slowly starts to catch up to where the tach is. Sent from my SM-G935V using Tapatalk

I've also developed a puddle below my left front Fork. Last time it was the anti dive this time looks like it's the top seal. I haven't tried to clean anything yet to see what the jack is going on there but will be addressing it while it's up on the jack. Sent from my SM-G935V using Tapatalk

That really sucks about the bike falling off the lift. I know it's been a couple weeks but I have been thinking about you. Sent from my SM-G935V using Tapatalk

Well I got 3 weeks in about 1800 miles out of the old girl before the clutch decided it was done. I've searched and searched and I can't come up with the parts list I need to replace the stack and Gasket and anything else I might need before I start that job? Do any of you have that information handy? Do I need the bent nose ring pliers if I'm not doing a master cylinder to do this job? Also I have yet to find a way to bookmark or save post that I want to keep for later referral. Is there somewhere on this site to build my own Library? I put the new heavy duty springs in this spring. Now I know it's the stack because cruising on the highway at 60, roll the throttle to full and the tach jumps to about 7.5 and then the speedometer catches up. Sent from my SM-T580 using Tapatalk

Yep! Sent from my SM-G935V using Tapatalk

I start getting twitchy at 145 miles Sent from my SM-G935V using Tapatalk

My solution... Sent from my SM-G935V using Tapatalk

Ditto Sent from my SM-G935V using Tapatalk

Dang! Working from 8-8 today. I will be at Village Pointe Toyota at 181st and West Dodge. That's the interstate coming in from Fremont so I'm right on Northwest edge of town. Let me know when and you can just stop by there and we can at least meet each other talk about it. I'll p.m. you my phone number Sent from my SM-G935V using Tapatalk

Y'all are OLD! Sent from my SM-G935V using Tapatalk

Would be nice if there were captions on the photos for the new part of the family to see who it is that's so smart and helpful and patient with all of us Sent from my SM-G935V using Tapatalk

I set front and rear at 40. Seems to help but now my clutch is slipping so I'm going to have to replace a stack I guess Sent from my SM-G935V using Tapatalk