Statussymbol Posted August 13, 2017 Share #1 Posted August 13, 2017 well I ordered some stuff for the RSV. New F4 customs biggest and widest with vent should be here tomorrow.. Wife will enjoy it. Too bad I didn't order it sooner because Fri and Sat we went on a 600 mile ride to northern Wisconsin. We visited Lake Superior and Michigan, stayed in Rhinelander. She was getting hammered by the wind on the interstate at 75mph. Her new helmet was chokeing her due to the wind buffeting to the point of having to take it off on the ride home. I also ordered this.https://www.amazon.com/gp/product/B01FI0S486/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 It should be here sometime this week since its coming from China. I will do before and after pics. Hopefully by Thurs I'll do both since I have to crack the fairing to get the new light in, no sense taking the windshield off twice. Hopefully the light pans out like to now out of stock broview s5 with the copper heatsinks. Stat Link to comment Share on other sites More sharing options...
videoarizona Posted August 13, 2017 Share #2 Posted August 13, 2017 Stat, not sure I understand. Didn't like the broview? If that's the case, what didn't you like? Link to comment Share on other sites More sharing options...
camos Posted August 14, 2017 Share #3 Posted August 14, 2017 Stat, not sure I understand. Didn't like the broview? If that's the case, what didn't you like?Missed it: "out of stock broview s5 with the copper heatsinks." Link to comment Share on other sites More sharing options...
Statussymbol Posted August 22, 2017 Author Share #4 Posted August 22, 2017 Well, got the light installed today during the eclipse...... the last pics were of the new F4 Custom tall and wide shield I ordered, but the ends do not follow the lines of the fairing....anyone who has a wide F4 shield have the same issue? Thanks stat Link to comment Share on other sites More sharing options...
camos Posted August 22, 2017 Share #5 Posted August 22, 2017 Well, got the light installed today during the eclipse......Does the Gen 2 have an adjustment knob for the headlight like the Gen 1 does? Looks like you aimed it higher than the original. Link to comment Share on other sites More sharing options...
Statussymbol Posted August 22, 2017 Author Share #6 Posted August 22, 2017 Does the Gen 2 have an adjustment knob for the headlight like the Gen 1 does? Looks like you aimed it higher than the original. yes it does, waiting til tonight when I ride to work to adjust, LED shines a little farther down the road than stock. Link to comment Share on other sites More sharing options...
WIZ Posted August 22, 2017 Share #7 Posted August 22, 2017 The f4 shield does not follow the contour of the fairing. Ron Link to comment Share on other sites More sharing options...
Flyinfool Posted August 22, 2017 Share #8 Posted August 22, 2017 yes it does, waiting til tonight when I ride to work to adjust, LED shines a little farther down the road than stock. The LED will shine farther down the road because its low beam is aimed higher then the OEM high beam. So you are effectively riding around all the time, day and night, with your hi beam on. You can use your pics to set the top cutoff of the lo beam to the same height on the garage door as the OEM light was, ALL of the other drivers on the road will be happy if you do. Link to comment Share on other sites More sharing options...
BratmanXj Posted August 22, 2017 Share #9 Posted August 22, 2017 The LED will shine farther down the road because its low beam is aimed higher then the OEM high beam. So you are effectively riding around all the time, day and night, with your hi beam on. You can use your pics to set the top cutoff of the lo beam to the same height on the garage door as the OEM light was, ALL of the other drivers on the road will be happy if you do. I don't have the manual in front of me, but is there a formula (X height at Y distance) that you aim for with these bikes. I know cars you usually do 25' distance. Link to comment Share on other sites More sharing options...
camos Posted August 22, 2017 Share #10 Posted August 22, 2017 I don't have the manual in front of me, but is there a formula (X height at Y distance) that you aim for with these bikes. I know cars you usually do 25' distance.There is a formula and hopefully I am remembering it correctly. While sitting on the bike about 25' from a flat wall, get a measurement from the ground up to the centre of the the headlight. Transfer that measurement to the wall then make a mark 2" down. While still sitting on the bike, aim the top edge of the headlight beam to the lower mark. I think this is pretty much the same method used to adjust a car's headlights. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now