Jump to content
IGNORED

Clutch Cover

Stanman

By Stanman
in Watering Hole

 Share

Recommended Posts

Stanman

Stanman

Posted
Posted

My clutch cover has a crack that a previous owner attempted to repair with some sort of epoxy(?). The repair has now let go and the cover leaks.. I don't know of any method of permanent repair on this material, so I'm wondering if anyone has a cover they are wiling to sell. Or do I have to go to fleabay? This is the 1300 cc engine. PM me if you have one you would like to sell.

Link to comment
Share on other sites
friesman

friesman

Posted
Posted (edited)

Hi

If you clean it up real well and get all the oil outta the crack, I would think JB weld would hold a long time, or at least until you can get a new cover.

 

Try looking here http://stores.ebay.ca/PinWall-Cycle-Parts-Inc/Yamaha-Venture-1983-1993-/_i.html?_fsub=4&_sid=12458664&_trksid=p4634.c0.m322

 

or here, this guy from Montreal has goldwing and venture stuff too http://stores.ebay.ca/al-sgarage001-goldwing-and-other/YAMAHA-VENTURE-1300-/_i.html?_fsub=1501260018&_sid=207211358&_trksid=p4634.c0.m322

 

Brian

 

Here is one.... at Pinwall, it needs a good clean and polish but should be fine. http://www.ebay.ca/itm/85-Yamaha-Venture-Royale-XVZ1200-ENGINE-CLUTCH-COVER-/190635604179?pt=Motorcycles_Parts_Accessories&hash=item2c62c478d3

Edited by friesman
Link to comment
Share on other sites
dingy

dingy

Posted
Posted
Hi

If you clean it up real well and get all the oil outta the crack, I would think JB weld would hold a long time, or at least until you can get a new cover.

 

Try looking here http://stores.ebay.ca/PinWall-Cycle-Parts-Inc/Yamaha-Venture-1983-1993-/_i.html?_fsub=4&_sid=12458664&_trksid=p4634.c0.m322

 

or here, this guy from Montreal has goldwing and venture stuff too http://stores.ebay.ca/al-sgarage001-goldwing-and-other/YAMAHA-VENTURE-1300-/_i.html?_fsub=1501260018&_sid=207211358&_trksid=p4634.c0.m322

 

Brian

 

Here is one.... at Pinwall, it needs a good clean and polish but should be fine. http://www.ebay.ca/itm/85-Yamaha-Venture-Royale-XVZ1200-ENGINE-CLUTCH-COVER-/190635604179?pt=Motorcycles_Parts_Accessories&hash=item2c62c478d3

 

 

A 1200 cover will not fit a 1300 motor. They are different overall width due to clutch spring differences.

 

Gary

Link to comment
Share on other sites
Stanman

Stanman

Posted
  • Author
Posted
I have an 86 engine that was donated to me, I wont be needing the clutch cover, its yours if you want it...It is off the bike now in a parts bin. I will take a picture later and post it if you like.

 

Sure I wouldn't mind seeing a picture. What do you want for it?

Link to comment
Share on other sites
Stanman

Stanman

Posted
  • Author
Posted
Hi

If you clean it up real well and get all the oil outta the crack, I would think JB weld would hold a long time, or at least until you can get a new cover.

 

Try looking here http://stores.ebay.ca/PinWall-Cycle-Parts-Inc/Yamaha-Venture-1983-1993-/_i.html?_fsub=4&_sid=12458664&_trksid=p4634.c0.m322

 

or here, this guy from Montreal has goldwing and venture stuff too http://stores.ebay.ca/al-sgarage001-goldwing-and-other/YAMAHA-VENTURE-1300-/_i.html?_fsub=1501260018&_sid=207211358&_trksid=p4634.c0.m322

 

Brian

 

Here is one.... at Pinwall, it needs a good clean and polish but should be fine. http://www.ebay.ca/itm/85-Yamaha-Venture-Royale-XVZ1200-ENGINE-CLUTCH-COVER-/190635604179?pt=Motorcycles_Parts_Accessories&hash=item2c62c478d3

 

Thanks for the leads, but only Pinwall has covers but for an 85. I tried repairing it last summer, but the crack is in the lower back corner. I found it very difficult to clean and put in the JB weld.. I don't think I got it clean enough because it only held for about a week.

Link to comment
Share on other sites
friesman

friesman

Posted
Posted
Thanks for the leads, but only Pinwall has covers but for an 85. I tried repairing it last summer, but the crack is in the lower back corner. I found it very difficult to clean and put in the JB weld.. I don't think I got it clean enough because it only held for about a week.

 

 

Oh I had it in my peabrain that you had a 1200,... Ill do some more diggin and see what can be found for a 1300.

 

Brian

Link to comment
Share on other sites
DragonRider

DragonRider

Posted
Posted

I cant get to it today, I will dig it out after work tomorrow. You can have it for a donation to St. Jude. Like I said it was donated to me and I don't need it since mine is an 83, I am just using the tranny from it. I plan on auctioning off the leftovers for St. Jude.

Sure I wouldn't mind seeing a picture. What do you want for it?
Link to comment
Share on other sites
Condor

Condor

Posted
Posted

The only way to properly fix that side cover is replace it. Weld it and it'll most likely warp and leak. Patch it and eventually the patch will let loose. Clutch covers turn up on Ebay throughout the riding season, and don't bring a whole lot of money because there isn't a big demand for them.... Just be patient... I'd patch for now and plan on doing the replacement ASAP....

Link to comment
Share on other sites
Stanman

Stanman

Posted
  • Author
Posted (edited)
You can have it welded if you have somebody with the proper equipment near by.

 

Bill

 

 

The other trick to that is they have to know how to use it. I've seen where a person claimed to know how to weld aluminum and it was some of the worst bird-s**t welding I had seen.

I think I'll replace the cover.

Edited by Stanman
spelling error
Link to comment
Share on other sites
a1bummer

a1bummer

Posted
Posted
The other trick to that is they have to know how to use it. I've seen where a person claimed to know how to weld aluminum and it was some of the worst bird-s**t welding I had seen.

I think I'll replace the cover.

 

Definitely! I've seen that as well. Once I seen so many air bubbles in a weld that it leaked oil right through it.

 

And as Condor stated, replacing would be the best choice.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...