Need a stock clutch spring for a 2nd gen

[TARHEEL RIDER]

does anyone have a stock clutch spring laying around from an upgrade? I have a friend who wants to remove the heavier spring and replace with a stock one.

[skydoc_17]

Hey Frank,

If you install a used, stock Clutch Diaphragm Spring from a bike that had a slipping clutch, then you will have a slipping clutch in that bike as well! If the amount of clutch lever pull pressure is the problem, then get a new stock clutch diaphragm spring from Yamaha, and you will be good for a while. (If you secretly have another kind of project in mind, contact me and I will hook you up! Unless you really are going to put a used, stock clutch diaphragm spring in your friend's clutch pac:doh:)

Earl

[RandyR]

What is the problem you are trying to solve?

 

What changes were made besides the stronger spring? was the 1/2 plate replaced with a full plate as many do? If so and you want a bit more of a slip zone, then going back to a 1/2 plate may be the answer.

[wes0778]

What is the problem you are trying to solve?

 

 

:sign yeah that:

 

Since I put the upgrade in mine I haven't noticed any difference in the clutch lever pull. I have noticed that the clutch engages a little more aggressively, which (IMHO) I like.

 

And yeah, why would he want to install someone's problem in his bike?

[P-roy]

I don't have one laying around, but am looking to do an upgrade as a preventative measure. I started pulling a trailer this year and thought a clutch upgrade would be a good idea. At this time I am NOT noticing any problems with the stock clutch. But I would be willing to make a swap, my stock for the upgrade provided there are no known issued with the upgrade you are looking to remove.

Let me know.

[TARHEEL RIDER]

he is not having any problems, he just doesn't like the feel of the heavier pull. I did tell him about SKYDOC'S upgrade. I think he just wants more of a stock feel. He has ridden my 09 and likes it.