Jump to content

foundryratjim

Expired Membership
 View Profile  See their activity

  • Posts

    38

  • Joined

  • Last visited

 Content Type 

Everything posted by foundryratjim

  1. foundryratjim
    I just installed a Mustang seat combo with drivers backrest. Have put 200 plus miles and can tell the difference. I made my own backrest support that is taller and sets the backrest back further to keep me back from the tank.
  2. foundryratjim
    This is very intersting information. Is the dyna -3000 programmable? or do they come bike specific?
  3. foundryratjim
    Finally got some nice weather and rode the bike to the dealer. They are going to replace both y pipes. They both have holes where they were welded. During the inspection the mechanic found that my rear shock was leaking oil, so they ordered one also. Now i just have to wait for the parts to come in.
  4. foundryratjim
    I don't believe so. If you were sucking in air at the head which would also cause a backfire you might damage your exhaust valve be the lean burn going on. I also have found that i do have a leak on the right side above the y joint.
  5. foundryratjim
    Checked them out, i do have an exhaust leak on the rightside above the y joint on the pipe that comes from the rear cylinder. on the inside of the pipe .i will be contacting my dealer to see how he wants to handle it.
  6. foundryratjim
    Thanks for the info. I have balanced the carbs and plugged off th AIS system. I will look at the y pipes this weekend.
  7. foundryratjim
    Exactly what are you calling the "y" pipe?
  8. foundryratjim
    I put a set on my 06 RSTD. When backing off the throttle i get popping. I have taken the tank off and check for exhaust and intake leaks but haven't found any. Any suggestions?
  9. foundryratjim
    I still can't see any brass caps or a place for them.
  10. foundryratjim
    I have only 2500 mi on mine, i hope the carbs are not varnished up. Does the tank need to be removed to see the mixture screws? I find it odd that the service manual doesn't sho them.
  11. foundryratjim
    i cannot find pilot air adjusting screws in diagram in the service manual.
  12. foundryratjim
    My mufflers are from krome works also. I wil try adusting the low speed mixture within the next couple of days. I will let you know how it works out.
  13. foundryratjim
    I have a 06 RSTD. I installed a set of mufflers from Barons, plugged off the AIS system, balanced the carbs. Barons said i don't have to rejet the carbs. I am still getting some popping on deceleration. Any suggestions?
×
×
  • Create New...