snyper316

O yeah that smell I hated taken biowaste to the dumper at Tyson. Easy job but the smell near egress it big Ole tumbler that sprays hot water and plucks the feathers but once you got back to cut up it wasn't too bad. Sent from my LG-K371 using Tapatalk

Holy cow that is alot of chickens. Sent from my LG-K371 using Tapatalk

@Yammer Dan you ever watch prison break a few years back. Sent from my LG-K371 using Tapatalk

Ill go back to my corner Sent from my LG-K371 using Tapatalk

Lol you grow up on farm? I remember my dad said he was going to get dinner walked outside grabbed block of wood, an axe, then a chicken. They really do run around with there heads cut off. Sent from my LG-K371 using Tapatalk

Come on Dan gotta do something to keep our minds busy. Talk about seat of our britches tonight tho Sent from my LG-K371 using Tapatalk

Did you ever pass the time looking for things to throw on it or touch it with. My favorite was killing snakes and tossing them over it. Not liking one Missouri question for cigarette tax want to know the results of that. Sent from my LG-K371 using Tapatalk

Hey ill do it got tow rope and redneck gear. Sent from my LG-K371 using Tapatalk

Started thread Lol. Ill keep you in suspense Sent from my LG-K371 using Tapatalk

So today I voted I came home after taking my daughter to school and turned on the TV and first thing I hear is someone talking about who they support and started yelling at the TV. Then second person I start yelling at it again so this goes on for few minutes I finally said you know what... In just gonna go back to my roots and changed to dvr and brought up American Pickers. Then I start chanting Frank Fritz for president. 😎 Sent from my LG-K371 using Tapatalk

Prayers to families of these fallen officers. I wouldn't say government I would say it is mainly the media just like I was mislead on a story of a boy that wildcat set me straight about. Sent from my LG-K371 using Tapatalk

Imma go make a thread... Sent from my LG-K371 using Tapatalk

Its been cold and wet here, might be watching TV and biting fingernails Sent from my LG-K371 using Tapatalk

They are illegal in my area. Had 15 buses about 4 yrs ago when the feds came in. Sent from my LG-K371 using Tapatalk

Honestly I knew the answers to your questions but now days so much has changed. Sent from my LG-K371 using Tapatalk

Wait I thought they had to know English I must have nodded off when it became different and is why I have to press one for english? Or like sometimes I get a call and its in Spanish first. Sent from my LG-K371 using Tapatalk

On subjects of landlords mine finally did something I got a brand new furnace and my gas gets turned on today! I fill like a kid in a candy store I will finally be able to cook. However the chimney is still there but the new furnace vents thru pcv pipe. It is a 92 unit the guy also put flex pipe on my stove. So after suggestion of switching to electric furnace to get around chimney not even a week later he got it done. Now I need to get right with him. The Mexicans we have around here generally do there things at there relatives and the parks. The islanders generally use one side of the park and man they have some really food!!! Sent from my LG-K371 using Tapatalk

I couldn't have said it any better myself, I will add something my stomach is in knots about tomorrow never have I been this scared for anything in my life. So I know you believe in prayer all I can ask the people who do Humble yourselves tonight and PRAY FOR AMERICA, And ITS CITIZENS.

Sounds like what happened with my bike when the starter went out, I chased that darn miss for months replaced wires and such. I also replaced the tci and ended up with same spark issue, Altho my old TCI was faulty. But with new to me one it was doing just about the same thing. What would happen tho is it seemed to run good at idle till it got warm then start to like a miss then one day it just started missing all the time went and pulled the caps off while they were hot and 2 out of 4 rattled, went down and got some ngk caps and replaced the OEM one with those got them all plugged in and the darn miss was gone. So I would suggest going to a car parts shop like a napa or something and get the 7mm wire I payed like .66 cents per foot for mine got 10 foot of it and get you some ngk spark plug caps and see what happens. My OEM wires needed replacing they were corroded all the way thru and I think bongo said something about something broke down inside the cap. When I took the one cap apart it had like 3 thin copper pieces that came out not sure where they came from but they were all round.

Yeah I seen that post but me it was grandpa's house, we would go ride bikes at like 5 in the morning to pick up cans up in Davenport IA. Good times.

Well being our tires are like my 6ply trailer tires I had 2 flats on it one actually blew out with probably well over 2000 lbs in it. Now the side that simply went flat was a little warm with slight bulge the other side was shredded and after changing out that tire I was able to pull it about 3 miles and the front one went. I know you can't compare much from tandem axle trailer but when that front one went i felt the Jimmy take a squat but was still able to limp it to Wal-mart come to find out my step dad had put all the weight on the front of the trailer. Instead of a more balanced load but wowzer at 55mph was about all I could do to hold it on the road you talk about weave. Then there was a wobble heading down a hill 😱. I thought for sure when I let off the gas I thought for sure we was done. A hell of a vibration I thought for sure one of truck tires had went. Managed to get to a gas station checked air pressure and one tire had nothing the other was a bit overinflated but once I corrected air pressure no more craziness. Got back here and got it parked. The next morning he had it opened up and wow everything crammed in the front and some tools in the back and bunch of empty buckets. Not sure but other then pulling a couple bed trailers,boat,and a motorcycle trailer. I haven't had much experience but I would think you would load most weight from wheels to front but kind of counter in the back. Anyways pretty much input so far is same as I would do in car ease off gas and coast her home persay. Can't really panic save that for once your stopped. Sounds like the time I had a blow out in my 74 ford in mid curve at 65mph, mind you this is highway 19 between Salem and steelville mo. This curve had speed rating of 30 mph but when it let loose I looked outside the window all I could see was pavement spun a complete 180 and came to rest at the side of the road facing the wrong direction but perfectly parked. But I tell you it was scary as hell, got out of the car and laid down in the snow my heart in my throat and my stomach in my chest. Thanking the lord I lived. Man it was a beautiful moonlit night and glistening off the snow crazy how something like that slows you down. Sent from my LG-K371 using Tapatalk

For me the auto insurance, motorcycle insurance, and renters insurance I pay $147 a month. I used to pay $52 a month for motorcycle and car insurance. My truck broke down so I cancelled the car insurance. 5 months later got the Tahoe and went to insure it and it was $148 a month just for it. Liability only. They told me the reason was cause of the lapse in car insurance. I don't understand till this day why mine jumped so much. I am not gonna pay for something that sits in my yard. They told me I should have got some other insurance for driver with no vehicle, But in this state they don't offer that. Misery is just bat ass backwards if you ask me.

@cowpuc was this tweaks in the early years?, because she sure does look like my ride.

1 Hour 30 minutes to Dairy Queen and back. I could do that what I could really do for a ride would be go 250 miles for a suitcase of burgers. We have no White Castle Close. I would even go 213 miles for a Jack in the Box which is also the closest one to me.

I have heard of people doing this many of ways, One being using a temp laser, Of which I do not have but there like $40 at harbor freight. Now that being said I bought my voltmeter a while back it has an inferred volts for something or other haven't figured that part out just yet. Back to original thing about temperature that voltameter also came with a white wire and a temp setting and just found out exactly whats going on. I have 3 cylinders running right around 160-170 ish the back left one however I knew was hotter because I could feel the difference on my legs. Its running about 205. Someone told me I believe you want it 185 ish; I don't know I just assume get the Morgan tools and do it the closest to the right way.