Jump to content

CATPower

Supporting Member
 View Profile  See their activity

  • Posts

    34

  • Joined

  • Last visited

 Supporting Membership subscriber

Reputation

15 Good

Personal Information

  • Name
    Manfred

location

  • Location
    Rogersville, TN, United States

Converted

  • City
    Rogersville

Converted

  • State/Province
    TN

Converted

  • Home Country
    United States

Converted

  • Bike Year and Model
    99 Venture
  1. CATPower
    While driving slow 1st gear pump the clutch lever to see if that helps going into N. If the pumping helps change clutch fluid and retry.
  2. CATPower
    What size of lights Link ?
  3. CATPower
    Did your Cooling Fan run ?
  4. CATPower
    To get oil/sludge/milk shake out of the cooling system: Dawn Dishsoap ........ after fixing what leaked over use a good mix of water/Dawn ...warm up engine till thermostat opens than drain and flush with water ...do this 3/4 times and you should be good to go. We use this on big Diesel Engines and it works great.
  5. CATPower
    Thanks Time to order one !
  6. CATPower
    Thanks for the update! So all you changed is the pressure plate? Did you use the springs that came with the plate or extra heavy duty springs ? Thanks
  7. CATPower
    Bert, please let me know how this works for you. I'm on the fence to do the same. My clutch slips when getting hard onto it.
  8. CATPower
    Wrong Pic with correct part # ??? different part #'s Venture part # 511-90-10002 www.barnettclutches.com/fits-all-v-max.html http://www.amazon.com/Barnett-Clutch-Spring-Conversion-511-90-10002/dp/B000GRXT50/ref=sr_1_4?ie=UTF8&qid=1442879545&sr=8-4&keywords=clutch+1999+yamaha+venture
  9. CATPower
    I got the Shinko 777's WW 130/90-16 front tire and very much like it ..... a lot easier to handle and it seems to roll through corners instead of plowing through
  10. CATPower
    Do you know why it overheated ?
  11. CATPower
    Hi, Does it die when you have the clutch pulled or actual put in gear ? Do you have a neutral light ?
  12. CATPower
    with the one speaker after unplugging yellow plug do you full control overt it ( sound , volume, balance, bass and station control ect....)
  13. CATPower
    Did you take all audio connectors apart ? If yes did you mark them ? I assume you had the tank and seat off...
  14. CATPower
    I'm with V7Goose
  15. CATPower
    Power goes from Battery to starter solenoid and fuse through a connector (red wire) to the ignition switch (on position) to fuse block #2 (brown/blue wire). Somewhere on here (this site) are the schematic for it.
×
×
  • Create New...