Stator/Rectofier test

[sleepy2]

Finally found connector for Stator and I think I did it right except haven't tried test with bike running as I have to wait until Phantom can run throttle for me! Followed @Freebirds updated file on this took me a while to find the right plug to disconnect to do test. Checked for Stator coil resistance  1-2, 1-3, 2-3 and it showed .3ohms(used the 200ohm setting on lower right) 

Did next test on higher Ohms setting(kept it on 200 as instructions said ^100. Touched pins from pins to ground and reading was .5

To do AC test I put meter on 200~(upper left on dial with AC button pushed down(by Mastercraft) and touched 1-2,1-3,and 2-3  meter said around 23,24

Then last test was highest Ohms setting 20M and test showed 0.00,pins to ground.

Did I do the test right with my meter or should I try and get some help????

[Marcarl]

You could call.

[sleepy2]

Just saw your reply! I will tomorrow! Things have been off lately so haven't had a chance.

[sleepy2]

Just ordered a new Ricks Motorsports Stator, Kimpex HD Voltage Regulator and a gasket for Stator. Nobody has a Cover2 gasket for the chrome cover behind Stator cover(Cover1) from    Fort Nine  in Montreal Quebec Canada  $433can free shipping! Should arrive by Friday or Saturday!

[RDawson]

1 hour ago, sleepy2 said:

Just ordered a new Ricks Motorsports Stator, Kimpex HD Voltage Regulator and a gasket for Stator. Nobody has a Cover2 gasket for the chrome cover behind Stator cover(Cover1) from    Fort Nine  in Montreal Quebec Canada  $433can free shipping! Should arrive by Friday or Saturday!

Partzilla shows to have the gasket in stock. I think I have one if you don’t find it. 

[sleepy2]

@RDawsonThanks for the information and offer, have a couple more dealers to try yet! Probably just use some gasket material I have leftover from gasket I made for clutch cover last fall to save time!

[sleepy2]

@RDawsonthanks for offer but I just found one at dealer locally that had one in-stock! Just waiting for other parts!

[sleepy2]

Got an e-mail last night about the parts I ordered! I was informed that the Stator I ordered was not available and DID NOT fit my bike like it said in the catalog so they gave me the right number for the one that does fit my bike! It will be $25 more! So now it will be next week before they arrive!