I replaced front disc pads - and naturally, front brake lever has no resistance whatsoever now. I'm reading out here about "reverse bleeding" using a syringe or something - I take I'm supposed to remove bleeder valve, and squirt dot 3 into the opening with a syringe or something similar. Does that sound right?
I'm assuming dot 3 will eventually overflow out...then what? Put bleeder valve back on and see if pressure builds up? Or try bleeding it normally? Reservoir on handlebar is full.
I wanted to change out rear pads, but my saddlebag on that side does not want to come off and I don't want to force it. It's almost as if the key lock isnt working right. Doesnt seem to be enough room to pull that caliper off with saddle bag on. Any suggestions?
Thanks in advance.
