New LED passing lamp and headlamp

[sfcrader]

I went ahead and purchased a set of passing lamps from eBay to go along with me new headlamp.

http://www.ebay.com/itm/2-30W-4-5-inch-Cree-LED-Harley-Motorcycle-Daymaker-Auxiliary-Fog-Driving-lights-/361250657595?fits=Make%3AHarley-Davidson&hash=item541c37953b:g:lnIAAOSw3mpXL-W5&vxp=mtr

 

I found out that the back of the light needs to be modified or find a smaller hollow bolt. I went with he modification, the center rid needs to be trimmed back in order to use the stock hollow bolt:

 

Old and new passing light installed:

Lights on side by side look:

Old passing light look:

New passing light look:

All new just need to adjust the lights tonight:

[Rafterd]

Mine came in today.

 

Bill

[sfcrader]

congrats, have fun with the project.

[flynvy5]

I did mine about a month ago but I cut the stock bolt down by half and it worked great.

[Wizard765]

Looks amazing and if the light is better than stock Wow!! Are you experiencing any interference with your radio?

[sfcrader]

Thanks, yes they are a lot better than stock and take less amps to use. So far no interference at all.

[cdwa_78]

Looks awesome..What headlight is that?

[Rafterd]

Installed my headlight got ready to install driving lights and guess what, they fell through the rims. My driving lights are

4 3/4 inch new ones are 4 1/2. Any ideas?

 

Bill

[sfcrader]

Not sure, do you have OEM passing lamp? also with passing lamps did you get?

[BUBBA1972]

How did you mount headlamp

[Sylvester]

Looks awesome..What headlight is that?

 

Yes for me, what headlight is that.

 

[Kretz]

Looks identical to the ones I got, Main & Passing, all I got to do now is get off my a$$ & get them fitted! LOL

[sfcrader]

Yes for me, what headlight is that.

 

 

I purchased the headlamp on ebay it was around $100 not sure what brand. I will go back and look, I do remember it did saying Daymarker.

[sfcrader]

How did you mount headlamp

 

I tried something that did not work. Than I found this website:http://venture.eurekaboy.com/headlightmod.htm I purchased a used headlamp off ebay and used that one to cut. I took my time did not want to rush and spent a complete weekend. The hardest part is trimming both the buckets and the back of the headlamps and passing lamps.

[bongobobny]

Hey!! We both own the same Saws-all!!!

[sfcrader]

This is another thread I started that showed what I had to do to make the LED Headlamp work. http://www.venturerider.org/forum/showthread.php?119811-Changing-to-a-LED-Headlamp hope it helps.