mbrood Posted January 4, 2013 Share #1 Posted January 4, 2013 I was sold these as going on a MKII 1st Gen bike and since I have a MKI as well I can verify it goes to neither... any help out there with finding their proper use? http://www.bergall.org/temp/venture/floorboards/mc1.jpg http://www.bergall.org/temp/venture/floorboards/mc1a.jpg http://www.bergall.org/temp/venture/floorboards/mc2.jpg Link to comment Share on other sites More sharing options...
Squidley Posted January 5, 2013 Share #2 Posted January 5, 2013 Do they have any #'s on them at all Mike? Link to comment Share on other sites More sharing options...
Pegasus1300 Posted January 5, 2013 Share #3 Posted January 5, 2013 they look like 1200 Goldwing boards by Markland.Can't be sure I haven't looked at one in a long time but tha's what it looks like. Link to comment Share on other sites More sharing options...
paysaw Posted January 5, 2013 Share #4 Posted January 5, 2013 Hi. I had a pair of these floor boards on my 84 Venture Royal.They fit fine. I swapped them with a member here Yamamike who put them on his 83. Link to comment Share on other sites More sharing options...
Brake Pad Posted January 5, 2013 Share #5 Posted January 5, 2013 I hope this picture will help, this is my old 1984 aspencade Link to comment Share on other sites More sharing options...
Eck Posted January 5, 2013 Share #6 Posted January 5, 2013 The same floorboard (without the hardware that you have) is shown attached to a 1997 Honda VT1100C2 ACE. Link to comment Share on other sites More sharing options...
mbrood Posted January 6, 2013 Author Share #7 Posted January 6, 2013 Brad, there are no numbers on the boards or the mount flanges. I sized them against my 84 and 86 and they fit neither and Markland said that they can't index anything that is out of production. These are in cherry shape but for a Venture utterly worthless. Link to comment Share on other sites More sharing options...
Squidley Posted January 6, 2013 Share #8 Posted January 6, 2013 Brad, there are no numbers on the boards or the mount flanges. I sized them against my 84 and 86 and they fit neither and Markland said that they can't index anything that is out of production. These are in cherry shape but for a Venture utterly worthless. Bummer, perhaps someone with some good fabricating skills could modify them into a set of highway boards for stretching their legs out Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now