dacheedah Posted August 4, 2012 Share #1 Posted August 4, 2012 Ok tonight everything is working fine then I started getting a fast flash on right turn signal. Checked all lights and they are fine, left turn works normally. Any thoughts?? Link to comment Share on other sites More sharing options...
BuddyRich Posted August 4, 2012 Share #2 Posted August 4, 2012 Fast flash usually means a burnt out turn signal on the side that is fast Link to comment Share on other sites More sharing options...
k9cottage Posted August 4, 2012 Share #3 Posted August 4, 2012 or a bad earth to the light. Link to comment Share on other sites More sharing options...
dacheedah Posted August 4, 2012 Author Share #4 Posted August 4, 2012 What I thought but they are all lit and nothing even dim . . . ., maybe I pull and clean Link to comment Share on other sites More sharing options...
Flyinfool Posted August 4, 2012 Share #5 Posted August 4, 2012 It is possible for a filament in the bulb to break and short to where it still lights but just not to the correct circuit. The flasher still knows it aint right. Link to comment Share on other sites More sharing options...
Guest scarylarry Posted August 4, 2012 Share #6 Posted August 4, 2012 Mine has done that a few times after I washed the bike...You did happen to washed before this happen did you? Link to comment Share on other sites More sharing options...
Freebird Posted August 4, 2012 Share #7 Posted August 4, 2012 Have you actually pulled the lenses and checked for water/corrosion? I've seen at least three RSVs that had water in the rear turn signals...these happened to all be the left rear though and the sockets had corroded. Link to comment Share on other sites More sharing options...
Flyinfool Posted August 4, 2012 Share #8 Posted August 4, 2012 Just another good reason to NEVER wash the bike........ Link to comment Share on other sites More sharing options...
dacheedah Posted August 4, 2012 Author Share #9 Posted August 4, 2012 Pulled the rear, all good. I rode over to Indiana to a yamaha dealer, they made calls and recommended replacing front and rear and see what happens... Thats what Ill try Link to comment Share on other sites More sharing options...
dacheedah Posted August 4, 2012 Author Share #10 Posted August 4, 2012 Pulled the rear, all good. I rode over to Indiana to a yamaha dealer, they made calls and recommended replacing front and rear and see what happens... Thats what Ill try Washed about a week ago, ridden every day since, Link to comment Share on other sites More sharing options...
dacheedah Posted August 5, 2012 Author Share #11 Posted August 5, 2012 I bought the wrong bulbs. . . these puppies have some strange offsets , so my end result was I pulled them out, all seemed fine, and ended up just putting them back in and guess what. They work fine now. I looked at the bulbs and they look good, the posts are at odd angles and not 180. . . Link to comment Share on other sites More sharing options...
Yammer Dan Posted August 5, 2012 Share #12 Posted August 5, 2012 Just another good reason to NEVER wash the bike........ :sign yeah that::sign yeah that: Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now