wkoepke Posted July 20, 2012 Share #1 Posted July 20, 2012 does anyone have a spin on oil filter adapter for a 86 that you would like to sell? or can someone get the measurements from one so i could make one. thanks,bill Link to comment Share on other sites More sharing options...
painterman67 Posted July 20, 2012 Share #2 Posted July 20, 2012 http://www.ebay.com/itm/Oil-Filter-Adapter-plate-83-93-Yamaha-Venture-/250988750735?pt=LH_DefaultDomain_0&hash=item3a7018678f#ht_500wt_922 this is what i have on my 91 ........works well David Link to comment Share on other sites More sharing options...
kbran Posted July 20, 2012 Share #3 Posted July 20, 2012 You can still get one from here I think http://www.buckeyeperformance.com/products.htm#1st Generation Link to comment Share on other sites More sharing options...
pmelah Posted July 20, 2012 Share #4 Posted July 20, 2012 i would go with the one on flebay its cheaper and looks more durable Link to comment Share on other sites More sharing options...
lsutley Posted July 21, 2012 Share #5 Posted July 21, 2012 If you look closely you may notice that the one on ebay used a smaller filter. The one from Buckeye uses a larger filter but the selection of elements is critical as some are too large in diameter to clear the front frame rail. The Fram filter pictured on the Buckeye site fits nicely. Link to comment Share on other sites More sharing options...
Snaggletooth Posted July 21, 2012 Share #6 Posted July 21, 2012 These filter fit the Rivco from Buckeye Performance. I have no idea if they fit any other types. These filter all fit inside the frame with no issues. Oil Filter (Gold) FIL 1381 Product Line: NAPA Filters Interchange Mfg.: Fram (Autolite) Interchange Mfg. Part Number: PH3950 Oil Filter (NASCAR) NFI 91381 Product Line: NASCAR Select Filters Interchange Mfg.: Fram (Autolite) Interchange Mfg. Part Number: PH3950 Oil Filter - Mobil One MFI M1105 Product Line: Mobil One Filters Interchange Mfg.: Fram (Autolite) Interchange Mfg. Part Number: PH3950 Oil Filter (ProSelect) SFI 21381 Product Line: NAPA ProSelect Filters Interchange Mfg.: Fram (Autolite) Interchange Mfg. Part Number: PH3950 Oil Filter - K&N Filters BK 7355554 Product Line: Balkamp Interchange Mfg.: Fram (Autolite) Interchange Mfg. Part Number: PH3950 BK 7355554 Link to comment Share on other sites More sharing options...
JohnMidnight Posted July 22, 2012 Share #7 Posted July 22, 2012 K&N's HP1005 fits on the Rivco Adapter, has no clearance issues, it does rub up against the bar, but not enough to cause damage, or injuries. (and after showing it to my boss, the guys went and made another one with even stronger stuff, and probably far better stronger tac welds) I've got that sitting at the shop though in case I ever need it. Link to comment Share on other sites More sharing options...
painterman67 Posted July 22, 2012 Share #8 Posted July 22, 2012 the ebay model I can reach up inside with no tools and take off. I dont have to remove the lower chin fairing and it doesnt rub any supports goiung on or off. Like I said it works well for me as so far no problems. Im on my 4th oil change now and have noticed no side effects. David Link to comment Share on other sites More sharing options...
jdross440 Posted July 24, 2012 Share #9 Posted July 24, 2012 Purolator L10193 and Mobil 1 M1-105 fits the Rivco adapter also. I use the Purolator. Purolator is about the only filter (others than Cummins and Dodge) that is approved for the Cummins diesel in my trucks. If it's good for them, then it must be good for the Yamaha. These part numbers come from a 1980 Chev LUV 4cyl (crossed Fram #back to actual vehicle). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now