albyzee Posted May 27, 2011 Posted May 27, 2011 How does one remove the sticker put on the gas tank on a new bike warning about wearing a helmet? I tired with my finger nail but its on very well. I certainly do not wish to scratch the paint trying to remove it. Thank you in advance for the help.
Kregerdoodle Posted May 27, 2011 Posted May 27, 2011 I used Goo-Gone on mine, soaked a rag in it and just kept at it, your right they do not come off easy.. Good luck K How does one remove the sticker put on the gas tank on a new bike warning about wearing a helmet? I tired with my finger nail but its on very well. I certainly do not wish to scratch the paint trying to remove it. Thank you in advance for the help.
Stache Posted May 27, 2011 Posted May 27, 2011 How does one remove the sticker put on the gas tank on a new bike warning about wearing a helmet? I tired with my finger nail but its on very well. I certainly do not wish to scratch the paint trying to remove it. Thank you in advance for the help. Old plastic bank card followed by Goo-Gone for the adhesive residue. Plenty of elbow grease required.
pegscraper Posted May 27, 2011 Posted May 27, 2011 Warm it up with a heat gun. It'll peel right off all in one piece very easily, no elbow grease required. A little mineral spirits will clean up the remaining residue.
SilvrT Posted May 27, 2011 Posted May 27, 2011 I used a "razor blade" scraper but I wouldn't recommend that unless you've had lots of experience using one. I have and I still managed to nick the paint.
GaryZ Posted May 27, 2011 Posted May 27, 2011 Warm it up with a heat gun. It'll peel right off all in one piece very easily, no elbow grease required. A little mineral spirits will clean up the remaining residue. A heat gun is the best way to remove decals. I used my wife's blow-drier to take the huge "Ninja" decal off of the sides of my first ZX11D.
BoomerCPO Posted May 27, 2011 Posted May 27, 2011 I used a hair dryer and WD-40 to get mine off back in 2007 when I purchased my Venture. Boomer....who sez any more labels/decals will now be removed by pygmies who enjoy eating those darn things.
albyzee Posted May 28, 2011 Author Posted May 28, 2011 I know ALOT of elbow grease will be required. I will try a hair dryer that sounds at least non chipable. Thank you all for the suggestions.
kevin-vic-b.c. Posted May 28, 2011 Posted May 28, 2011 Don't know... my '86 still has the stickers.... and keeping them
muaymendez1 Posted June 21, 2011 Posted June 21, 2011 As Pegscraper said. A heat gun will aid in sofenting the gulue and peel off very easy. This will also work for any emblems that are glued on. My badges came off with a lil heat and a 10lb fishing line.
jrcain32 Posted June 21, 2011 Posted June 21, 2011 I have used Goo-Gone and it was OK but Turrle Wax makes a sticker and label remover that works/worked a lot better for me. Walmart has it and it (auto section), in a spray can and if I remember correctly it is cheaper than Goo-Gone.
muaymendez1 Posted June 21, 2011 Posted June 21, 2011 Ive seen some guys use bug and tar spray remover as well. With similar results.
muaymendez1 Posted July 1, 2011 Posted July 1, 2011 A hammer chisel and some 120 grit sandpaper will remove that stubborn decal!!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now