resqmedic02 Posted June 13, 2007 Share #1 Posted June 13, 2007 My engine oil level light has been coming on quite regularly until today, now it stays on. Oil is full as seen throught sight glass with bike on center stand on level ground. I did an oil change 2 days ago and the light seemed to stay out for about an hour then came on again. It never did last season. Any answers to why or suggestions to fix this problem. The warning light gets distracting and annoying. Thanks Link to comment Share on other sites More sharing options...
sarges46 Posted June 13, 2007 Share #2 Posted June 13, 2007 It could be nothing that a resolder job on the puter in the display wont fix. Thats all I can think of at this hour! Sorry. Maybe a sensor inside is not going up with the oil level? Link to comment Share on other sites More sharing options...
StuD Posted June 13, 2007 Share #3 Posted June 13, 2007 You can allways put a sticker over the warning lite.:rotf::canada::rotf: I know, no real help.............. Link to comment Share on other sites More sharing options...
Squeeze Posted June 13, 2007 Share #4 Posted June 13, 2007 Hi, first off all make sure that there is enough Oil in the Engine. second, check the Connection of the Sensor and measure the Signal it brings up third depending on either the Sensor is stuck somewhere, the SensorContakt isn't relasing or the Floater isn't floating anymore, take the Sensor out and check it out fourth if the Sensor Signal seems to bee good, there's can be a short in the Wires to the Display or the DisplayContacts need to be resoldered Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now