2010pburgfish Posted April 29, 2011 Share #1 Posted April 29, 2011 Water pump drain bolt. If you have a Method other than loosening pipes pardon for the redundancy. I cut a 17mm socket down to an inch and cut the head off of a an old 2 stroke plug wrench, good steel, 1/8" thick, 6" long, welded the flat metal to the top of the socket and it works like a charm. bf Link to comment Share on other sites More sharing options...
aharbi Posted April 30, 2011 Share #2 Posted April 30, 2011 I did something similar. I also cut down a 17mm socket. But I use the HF serpentine belt tool with the cut-down socket. Just a word of caution, you can't torq it to spec and the serpentine belt tool is LONG so it's very easy to put more than enough leverage to it. Link to comment Share on other sites More sharing options...
Flyinfool Posted April 30, 2011 Share #3 Posted April 30, 2011 Link to comment Share on other sites More sharing options...
2010pburgfish Posted May 2, 2011 Author Share #4 Posted May 2, 2011 I'll Try! My computer exploits have had mixed results. bf Link to comment Share on other sites More sharing options...
2010pburgfish Posted May 3, 2011 Author Share #5 Posted May 3, 2011 HOPE! This worked! Link to comment Share on other sites More sharing options...
Flyinfool Posted May 3, 2011 Share #6 Posted May 3, 2011 It worked fine thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now