Search the Community
Showing results for tags 'pry'.
Found 3 results
-
I've removed my fairing on my 2006 RSV for painting, as it has a few scratches on it. I need to get the 2 small pieces of trim off. Do they simply pry off? As they're only plastic I'm afraid I might break them if I don't do it right. Thanks in advance......
-
When doing maintainance on the rear wheel hub assembly, is it okay to use "white lithium" grease, on the splines and hub pins,or is there another type to use? I know that some people have complained about the lack of grease in this area, the white lithium looks like it may be too light for the job. I had to pry the hub out of the assy using a pry bar, it was rusted in there good, no sign of any grease from the factory. I cleaned of the pins with a wire wheel and cleaned the bore's out with a .20 gauge smooth bore barrel cleaning tool, you know what I mean the copper brush thing, lol. Yes ay info on what type of grease to use would be helpful. Cheers Keith.
-
I removed the rear wheel and put grease on the drive shaft and wheel splines. I could not get the hub off I removed the retaining clip but still could not get it to come off, I did not want to pry on it for fear of damaging the hub or the rubber seal. Any ideas? Dale
