Jump to content

almariders

Expired Membership
 View Profile  See their activity

  • Posts

    27

  • Joined

  • Last visited

 Content Type 

Everything posted by almariders

  1. almariders
    Thanks for the advice on the cam guides, at 60k on the Venture I will scratch that off my maint. list
  2. almariders
    Will be checking the valve clearance my 1999 Venture with 60k on the engine. Been wondering how to check for wear on the cam chain guides and tensioners, and how would you go about replacing them.
  3. almariders
    Replaced the Starter relay yesterday and used dielectric grease on all the connections. Took it very a ride today and the bike shut down on me twice. Tomorrow I will pull the tank and check the connections on the ignition switch. Tried to restart the engine with the key still on---crank no start. Turned the key of then on---started right up----leads me to believe the switch is acting up. Will keep every up to date. Thanks for the feed back
  4. almariders
    Just got thru installing the second starter relay on my 1999 Venture 1300 TDF. It is located under the battery box on the left side. The problem starts with bike shutting down when riding or idling. Turn the key on and of and it starts up. Managed to get it home. Pulled the battery and battery box, checked all connections. Found the connections on relay loaded with corrosion, the entire relay was corroded, the plastic had holes in it, could look inside it. Installed new one, problem solved. With in 6 or 7 thousand miles same thing happened. Have been using a sealed battery, no signs of battery acid running down to the relay. Has any one run into this problem and has any suggestions on how to stop the corrosion build up on the relay.
  5. almariders
    Got lucky today. Found a Bridgestone 702G White Wall 150/90-15 bias belted rear tire on E-Bay which is the OEM tire recommended in the O.M., and is the tire I have been using for many years. Looked at the Shinko tires and could not find a white wall tire in the correct sizes to fit on the 1999 Venture which takes a 150/80/16. front. Should have the Bridgestone here in about 4 days, will also be installing a Hagon rear shock at that time. Getting the Venture ready for my 9th year doing the Run for the Wall. Thanks for the feed back
  6. almariders
    Have a 1999 Venture, Have been running a Bridgestone 150/90/-15 White Wall in the rear and a 150/80-16 White Wall on the front. Spent most of the day yesterday looking for a replacement tire for the rear. Seems like Bridgestone has stopped production of the rear tire in that size in a white wall. Spent hours today looking someone who has that tire in stock with no luck. the front tire is still in very good condition. Tried today to buy front and rear tires in a white wall from Dunlop, and Shinko, no luck. Did find a Dunlop in a 150/90-15 rear White Wall that will fit, could not find a Dunlop front tire in white wall. Not sure if running a Bridgestone in the Front and a Dunlop in the rear, both in the correct size for the Venture would create any problems. Please let me know if anyone has run into this situation before. Really don't want give up the white wall look
  7. almariders
    Thanks for the feedback. Looks like I will not due the Run For the Wall with the old shock . Used one does not make a lot of sense either. Hagon seems to be the way to go. New Bike would also be a solution!!!
  8. almariders
    I have a 1999 Venture Royale with 60k, just got back from a 5 hour ride parked it in the drive way. Noticed a quarter size puddle under rear shock, and yes it is leaking. Will be leaving May 16 to do the Run for the Wall to Washington D. C., about a 3,500 mile trip. Really can not afford to put a new one right now. Does anyone know if it would be possible to ride it that far with out any fluid in the shock.
  9. almariders
    Have now replaced fuel filter and fuel pump and this has solved the cold start up and back firing ---now running like it should. Thanks for all the help and tips. Will be doing the Run for the Wall ride from California to Washington D.C. getting the bike ready for the long ride.
  10. almariders
    The points on my pump on my fuel pump need to be replaced, could you tell me where I can buy a new set
  11. almariders
    Thanks for all the help, I have changed the filter, not easy but do able. Next time will be easier. Old one was really dark and cruddy. Bad filter has probably been overworking the fuel pump. Checked the condition of the points in the pump and they are also in bad condition. Will be replacing them. Hope this cures my starting off problem.
  12. almariders
    I have a California model Royal Star Venture 1999 and I am trying to change the fuel filter. Any tips on getting out of the bike, do I have to remove fuel pump to do it, shop manual says to remove it. Also the pump stopped making the clicking noise when you turn the key on a few weeks ago, I placed my hand on the pump and turned the key still no noise but I did feel a weak clicking feeling in the pump, could this be a sign of a weak pump. Have about 52k on the bike. Any suggestions wold be very helpful.
  13. almariders
    Just changed clutch fluid a few days ago could not get the air out of the lines till I got a vacuum pump half price from Harbor Freight @25. Works like magic it will blow the air out of the system
  14. almariders
    For the second time this week on the first start of the day, with the coke all the way out, engine fires right up with a good fast idle, when I drop it in first and start off it will stumble badly and fire off a few backfires, seems to running on 2 cylinders this will continue to happen till the engine is completely warmed up. Tried putting choke lever in and out no effect. The choke lever has had some issues in the past, sometimes it will not stay out when it is cold, but it does not fell like a choke problem to me, more like a fuel or bad coil problem to me. 51 k do not know when fuel filter has been changed last, this is my second year of owning the bike. will try changing fuel filter first, looking for some help in solving this problem open for any suggestions Thanks
  15. almariders
    Just finished changing clutch and brake fluid and front brake feels better not grabing as much. I think I will also replace the front pads in a effort to get rid if the crabbing front brakes. Any suggestions on which pads would be best to use.
  16. almariders
    You are right, very good brake and clutch fluid info in that post. Will be changing both this week Thanks
  17. almariders
    I have scuffed up the brake pads and lightly scuffed the rotors and the front brake is better. Next step is to change the brake fluid. do not know how long that fluid has been in the lines. The fluid in the sight glass has darken some what so that is the next step. Will let every know what happens. Thanks for the info
  18. almariders
    For the last 4 thousand miles or so, front brakes on my 99 Venture Royale have been grapping badly making the front brake very hard to use. Pulled the brake pads to day and there is plenty of pad left but they are very glazed over and seem very hard. bought the bike a few years ago these pads were on the bike, do not know what brand or type they are. I have sanded the glaze off . Was wondering of any one else has had this problem. Have been thinking of just replacing them with the EBC Semi Sintered V pads any ideas or suggestions.
  19. almariders
    Just got back from a great ride today in 85 degree weather here in Palm Springs area, went to hang helmet on rt side holder and guess what, it was gone. Must have loosed up and flew off some where along the ride . It reminded me of the 05 Ultra Classic I had for 5 years. So I will be looking for a replacement for it and everyone might want to check the tightness of the holders on your bikes.
  20. almariders
    Just tried to post a classified add, way to complicated for a computer dummy like me, must be a easier then way to do it any help out there?
  21. almariders
    Thanks for the tip to go to settings, I got it done but it wasn't easy for a computer dummy like me
  22. almariders
    All ready tried that, I get message that tells me I do not have permission to enter
  23. almariders
    Would like to become a become a full member but have been unable find in the website where to go. The instructions tell me to go to my UserCP could anyone tell me where to find that tab Thanks
  24. almariders
    Been married to the same good women for 47 years and we still ride together a lot. She has been one two cross country trips with me, one being the Run for The Wall in 05. My first name is Alan her's is Mary sooo we have almariders as our user name
  25. almariders
    Thanks for all the tips, and yes it was a case of miss alignment of the splines. peeked thru inspect hole on top of the swing arm and used a screw driver to help hold the joint in place, then verified it was in place by turning joint with screw driver and seeing gears in rear move. Never had that much trouble with alignment before, but it is back together and running fine Thanks again to everyone
×
×
  • Create New...