YamahaLarry Posted August 6, 2015 Share #1 Posted August 6, 2015 While my bike is down, doing a little preventative maintenance while parts are out to be painted. Although they still have a few miles left on them, I have decided to go ahead and replace my brake pads and been looking at the options. On my last bike, I installed the EBC sintered brakes. They claim to have better stopping power and longevity. Was really hard to tell if I gained very much in stopping, but thought that I could tell a little difference and didn't keep the bike long enough to know if the sintered brakes actually last longer. Thoughts? Sintered or not and where is the best place online that you have found for 2nd Gen pads? Link to comment Share on other sites More sharing options...
Flyinfool Posted August 6, 2015 Share #2 Posted August 6, 2015 Be careful putting better brakes on the rear. It is already very easy to lock the rear so you really do not need or want more brake back there. Link to comment Share on other sites More sharing options...
djh3 Posted August 7, 2015 Share #3 Posted August 7, 2015 ANybody have input on Carbon pads? I just bought a pair from what I have heard they have a little better wear than OEM but dont destroy to rotor. Link to comment Share on other sites More sharing options...
Rick Butler Posted August 7, 2015 Share #4 Posted August 7, 2015 Larry, If I were you I would put EBC FA179 HH Copper sintered pads on the front and FA123 Organic pads on the rear. The organic pads use Kevlar or Aramid which Skydoc told me doesn't really grab hard until they get real hot........which helps in keeping the rear brake from locking up with occasional hard rear braking. Now the HH pads grab good and have a nice smooth feel and do not gouge the rotors. Hope this help, Rick While my bike is down, doing a little preventative maintenance while parts are out to be painted. Although they still have a few miles left on them, I have decided to go ahead and replace my brake pads and been looking at the options. On my last bike, I installed the EBC sintered brakes. They claim to have better stopping power and longevity. Was really hard to tell if I gained very much in stopping, but thought that I could tell a little difference and didn't keep the bike long enough to know if the sintered brakes actually last longer. Thoughts? Sintered or not and where is the best place online that you have found for 2nd Gen pads? Link to comment Share on other sites More sharing options...
billmac Posted August 10, 2015 Share #5 Posted August 10, 2015 I get my pads from D2moto.com Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now