Ponch Temperature Gauge

[Rick Butler]

Hey Guys,

 

Some time back I saw a post that had the part number for the adapter Ponch provided with his gauge set for the water temperature probe into the head.

 

I'll be danged if I can find it. Does anyone know the adapter I'm talking about? I need one.

 

Any help would be greatly appreciated,

 

Rick

[pktexas]

Hi Rick, did you see this writeup by V7Goose. I have Ponch's gauge set on my midnight, but not sure on the adapter part#.

 

http://www.venturerider.org/forum/sh...ad.php?t=19119

[Rick Butler]

Sorry Perry,

 

This link doesn't work.

 

The part I'm talking about is an adapter that screwed into the top front cylinder so you could screw in the temp probe for the temperature gauge.

 

Rick

 

 

  pktexas said:

Hi Rick, did you see this writeup by V7Goose. I have Ponch's gauge set on my midnight, but not sure on the adapter part#.

 

http://www.venturerider.org/forum/sh...ad.php?t=19119

[k9cottage]

i have downloaded every how to and store them on my external hard drive saves me looking when i need them.

[bikerjohn]

Rick, there is a right up from freebird on 2 -10, I used the process and it worked great. I did however make one mod on the temp gauge. I did not use the brass piece that screws into the plug fouler, I drilled the plug fouler and used it.

[PGunn]

At the end of this doc all the adapters you will need are listed the PDF attached

http://www.venturerider.org/forum/showthread.php?p=632986#post632986

[V7Goose]

  Rick Butler said:

Sorry Perry,

 

This link doesn't work.

 

The part I'm talking about is an adapter that screwed into the top front cylinder so you could screw in the temp probe for the temperature gauge.

 

Rick

Rick, I do not know what specifically Ponch used, but my original guge writeup with the exact parts is here:

http://www.venturerider.org/forum/showthread.php?t=19119

(link tested and works for me)

Goose