Miles Posted July 27, 2012 Share #1 Posted July 27, 2012 (edited) Hey everyone, all of my searches at Rick's Motorsports Electrics and at Buckeye Performance has tuned up...nada...in regards to an upgraded high output Regulator/Rectifier. I just replaced my Stator with a new High output one from Buckeye. Job Done ! Now I need the new Regulator/Recifier to allow me to flow all that extra juice. I have viewed and followed every thread and link I can find on this forum regarding this. Does anyone really know a company that makes or sells an upgraded higher output Regulator/Rectifier for the newer RSTD or Ventures ??? And while I just know that one or more of you are going to suggest the Shindengen R/R, I have done a lot of searching there too, and I have not found definitive info on exactly which part number would be used for my 2006 RSMTD. Thanks, Edited July 27, 2012 by Miles Link to comment Share on other sites More sharing options...
lsutley Posted July 27, 2012 Share #2 Posted July 27, 2012 You might give this guy a try? http://roadstercycle.com/Shindengen%20FH012AA%20Regulator%20upgrade%20kit.htm Link to comment Share on other sites More sharing options...
Cougar Posted July 27, 2012 Share #3 Posted July 27, 2012 Contact SkyDoc... http://www.venturerider.org/classifieds/showcat.php?cat=22 That is where I got mine.. (Shindengen R/R) Darn thing really kicks butt. You will love it. PLUG AND PLAY Jeff Link to comment Share on other sites More sharing options...
Miles Posted July 27, 2012 Author Share #4 Posted July 27, 2012 (edited) Cougar, I have sent a PM to skydoc_17, asking if he has one, but from all the listings I have seen from his ads, all of his R/R are for first gen bikes. He doesn't show that he has any R/R for second gen bikes. Miles Edited July 27, 2012 by Miles Link to comment Share on other sites More sharing options...
Cougar Posted July 27, 2012 Share #5 Posted July 27, 2012 Correct... He will direct ship it.. trust me I keep bugging him to make that better. it is in there someplace I have seen it. .BUT you already contacted him and he WILL email you back shortly will a BILL I forgot , but want to say it's like $98 or so? Let me know when you get yours , if your excited as I am with the new RR.. Jeff Link to comment Share on other sites More sharing options...
Miles Posted July 27, 2012 Author Share #6 Posted July 27, 2012 Jeff/Cougar, I (being impatient, because I have rides to do) gave a phone call to Rick at Buckeye Performance this morning, fortunately it is 3 hours later in Ohio. While he too does not list a new R/R on his website, in the list of items he sells, he does in fact sell a plug 'n play new upgraded, higher capacity R/R. I ordered one, and now await...my fate. Link to comment Share on other sites More sharing options...
Cougar Posted July 27, 2012 Share #7 Posted July 27, 2012 There ya go my friend! ENJOY! what was his cost just for the heck of it? I did not now that he carried them. nice to know this, thanks! Jeff Link to comment Share on other sites More sharing options...
Miles Posted July 27, 2012 Author Share #8 Posted July 27, 2012 Jeff, his cost to me for the new high capacity R/R is about $ 125.00. That is what he quoted me. I have not seen the final debit on my bank account yet. While I know that this is a higher cost than what can be found elsewhere, for similar R/R's, I would rather spend my money at Buckeye Performance, and help support a small business that caters to Venture/Royal Star/Wing products. I have talked with Rick at Buckeye Performancer a couple of times now, and I like what I hear from him. BTW...He does either HAVE, or is getting, some more Flanders 650-08783 bars. So, if anyone wants the new handlebars, contact him. Miles Link to comment Share on other sites More sharing options...
Cougar Posted July 27, 2012 Share #9 Posted July 27, 2012 Miles , your truly going to be impressed with the up-grade. Link to comment Share on other sites More sharing options...
reddevilmedic Posted July 27, 2012 Share #10 Posted July 27, 2012 i just put a Shindegen in my first gen...it works with any 3 phase stator....3 wire...http://www.ebay.com/itm/380446591982?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now