gaillarry Posted August 11, 2011 Share #1 Posted August 11, 2011 Just changed the rear tire and confused about the assembly of the spacers on the rear wheel. I read the posts on the tech pages about the spacers but I have a thick spacer not shown in those photos. I've highlighted it below. Where does it go? (I have the nut and washer for the other side) http://i6.photobucket.com/albums/y217/gaillarry/VentureAxleSpacers-1.jpg Link to comment Share on other sites More sharing options...
Sylvester Posted August 11, 2011 Share #2 Posted August 11, 2011 What bike is it off? Your profile says Venture Royale 2006. I don't know what that is! Link to comment Share on other sites More sharing options...
darthandy Posted August 11, 2011 Share #3 Posted August 11, 2011 Put your city in your profile and someone who is nearby and knowledgeable might even come over and have a look. Andy Link to comment Share on other sites More sharing options...
Sylvester Posted August 11, 2011 Share #4 Posted August 11, 2011 If it is indeed a 2006, there are only two washers one before and one after the "rear brake caliper bracket". And like you stated one washer and one nut for the axle. Link to comment Share on other sites More sharing options...
gaillarry Posted August 11, 2011 Author Share #5 Posted August 11, 2011 Its a 2008, I can't type worth a crap. Its the spacer on the left of the brake bracket that has me confused. Does this look good now? http://i6.photobucket.com/albums/y217/gaillarry/XVAxles.jpg Link to comment Share on other sites More sharing options...
Sylvester Posted August 11, 2011 Share #6 Posted August 11, 2011 Its a 2008, I can't type worth a crap. Its the spacer on the left of the brake bracket that has me confused. Does this look good now? http://i6.photobucket.com/albums/y217/gaillarry/XVAxles.jpg The inside spacer looks right as it is called a collar but the outside is but a washer between the brake braket and the swing arm. Link to comment Share on other sites More sharing options...
V7Goose Posted August 12, 2011 Share #7 Posted August 12, 2011 FYI - your bike has a Barons lowering kit on it instead of the stock brake caliper bracket. Goose Link to comment Share on other sites More sharing options...
Sylvester Posted August 12, 2011 Share #8 Posted August 12, 2011 That would explain a lot. I have never seen one. Good one V7goose. Link to comment Share on other sites More sharing options...
steamer Posted August 12, 2011 Share #9 Posted August 12, 2011 Goose beat me to it. Yes it is a lowering kit,I had one on my RSV and the last picture looks right. Link to comment Share on other sites More sharing options...
SilvrT Posted August 12, 2011 Share #10 Posted August 12, 2011 FYI - your bike has a Barons lowering kit on it instead of the stock brake caliper bracket. Goose I was looking at that in the original pic and now the one above .... was wondering what the *&$! it was and moreover, what kindof bike as it sure don't look like what is normally there on these bikes. Link to comment Share on other sites More sharing options...
steamer Posted August 12, 2011 Share #11 Posted August 12, 2011 Looking at the pic's again,that doesn't look like the same axcel thats on my 99 rsv??? Link to comment Share on other sites More sharing options...
SilvrT Posted August 12, 2011 Share #12 Posted August 12, 2011 Looking at the pic's again,that doesn't look like the same axcel thats on my 99 rsv??? ya ... mine don't stick out that far neither! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now