Yamaha torx carb nut driver- where do i get one?

[jonsmyth]

I need a special screwdriver- torx YU-25359- to remove the "tamper resistant" screws in the covers of my carbs on my 87 venture.

 

Any sources? I cringe at the thought of buying anything from them and you pay through the nose...and arm...

 

Thanks!

[Yammer Dan]

Harbor Freight has a set of security bits with one in it for 3 or 4 bucks.

[GeorgeS]

Check tool department at the hardware store:

 

Most of use, simply replace those screws, Usually its impossible to get those tamper proof screws out without damaging them beyond repair.

[rjg1985]

I bought mine at our local Fastenal store and while i was there i bought new stainless socket head screws to replace the old ones.

[BuddyRich]

I just take a screwdriver of the right size and break the tit off. Then just use a regular torx bit. You don't have to worry about warranty so why not.

[Venturous Randy]

Use Vise Grips to break that screw loose, and probably the others, and then replace them with allen head screws. You will be glad you did.

RandyA

[wes0778]

Harbor Freight has a set of security bits with one in it for 3 or 4 bucks.

:sign yeah that:

 

That's where I got 'em...