Burninator Posted April 9, 2009 Posted April 9, 2009 I installed a new sealed battery. It has no connection for the small wire was connected to the original battery. As result a battery icon shows up on the display. I assume there is nothing to worry about and just ingnore the icon. Any comments?
sarges46 Posted April 9, 2009 Posted April 9, 2009 Read this tech tip to resolve that little pesky light thing. http://venturerider.org/forum/showthread.php?t=489
gibvel Posted April 9, 2009 Posted April 9, 2009 There's no harm in leaving it that way but there's a fix for it if it bothers you: Battery Warning Bypass
GeorgeS Posted April 9, 2009 Posted April 9, 2009 If you do the Mod, be sure to install the Resistor !!! DO NOT HOOK , that wire going to the battery water level sensor DIRECTLY to 12V !!!!!!!!!!!!!!!!!!! If you do, it will FRY, the Display unit
Big Daddy Posted April 10, 2009 Posted April 10, 2009 I installed a new sealed battery. It has no connection for the small wire was connected to the original battery. As result a battery icon shows up on the display. I assume there is nothing to worry about and just ingnore the icon. Any comments? Hey Christian! If you do this job shoot me your addy and I will mail a couple resistors to ya!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now