tag a long trailer from h/f

[latchkey]

can anyone tell me the size of bearing buddys for the tag a long trailer from h/f..they gave me 1.98 but are way to loose.

[latchkey]

maybe they dont make them for the h/f tag along? sure hope someone has found them.

[Squidley]

Mike,

 

If you have the hubs off your trailer take them into a trailer supply house or good autoparts store like Carquest and have them measure the ID of the hub to get the right dimention.

 

 

[Flyinfool]

Or even easier, take one of your caps in to have them measure it.

 

Since the bearings are an oddball metric size I would assume that there is a good chance the bearing caps are also metric.

[wes0778]

Or even easier, take one of your caps in to have them measure it.

 

Since the bearings are an oddball metric size I would assume that there is a good chance the bearing caps are also metric.

 

For future reference, what are the Timken numbers for the cheap Chinese ones???

[latchkey]

thanks guys, i`ll head to a auto store for help. i take my dust cap and let them measure off that.

[Flyinfool]

thanks guys, i`ll head to a auto store for help. i take my dust cap and let them measure off that.

 

Make sure to let them know that you think it might be metric so that they do not just pick the close inch size. Which is what you already have.

The 2047 Bering Buddy is the next bigger size from the 1.98 that you said was to loose.

http://www.bearingbuddy.com/select.html

Edited August 8, 2011 by Flyinfool