a1bummer Posted December 22, 2009 Share #1 Posted December 22, 2009 Just curious if anybody knows for sure if this kit for the VMax will work on our MKI's and or MKII's. I know somewhere somebody said they might except for an o-ring or two. NEW YAMAHA V-MAX V MAX VMX12 KEYSTER CARB KIT 1985 - 2005 Kit K-923YK One Kit fixes one carb, bid price is for one kit Kit includes: includes float gasket; slide needle; float needle and seat; #90 intermediate and #37.5 slow jet; air screw; misc packing and gaskets and "O" rings as shown http://cgi.ebay.com/ebaymotors/YAMAHA-V-MAX-VMAX-VMX12-KEYSTER-CARB-KIT-1985-2005_W0QQitemZ380186182261QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item5884dcc275 Link to comment Share on other sites More sharing options...
warthogcrewchief Posted December 22, 2009 Share #2 Posted December 22, 2009 (edited) Yeah, VMax carbs are the same as the Venture. The jets may be a little different though. If you're looking for parts, check out these sites: http://www.partsnmore.com http://www.oldbikebarn.com http://www.carbkitcapital.com http://www.bikebandit.com Edited December 22, 2009 by warthogcrewchief Link to comment Share on other sites More sharing options...
MiCarl Posted December 22, 2009 Share #3 Posted December 22, 2009 When I set up my store I looked into that kit. The only part that seemed correct was the float bowl gasket. The float valve, jet needle and jets all have different part numbers than the V-max. The assortment of o-rings may have some that fit. The float valve may fit but have a higher flow rate. If you want that kit I can sell it to you for about $24. The Venture carburetor actually seems to share more parts with the 535 Virago. I think I can get that kit too. If you're looking for the float valve I might be able to get that if I had the numbers off your current valve. Why don't you go to my online store (http://store.thundervalleypower.com) and send an email via the "Contact Us" link and tell me exactly what you need and I'll try to help out. Link to comment Share on other sites More sharing options...
a1bummer Posted December 22, 2009 Author Share #4 Posted December 22, 2009 Thanks, I'll take a look when I get some more time. I assume that's the price for one kit to do one carb? Link to comment Share on other sites More sharing options...
MiCarl Posted December 22, 2009 Share #5 Posted December 22, 2009 Thanks, I'll take a look when I get some more time. I assume that's the price for one kit to do one carb? Yes, 1 kit, 1 carb. It's not listed but I'll put it there if you want it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now