GolfVenture
-
Posts
1,816 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Events
Store
Posts posted by GolfVenture
-
-
Just picked them up from the postage office, and they look super awesome. I'll get the package envelopes and start stuffing and addressing them and try to get them out Friday 5 July, if not then by Monday.
For those late comers who would like some also, there is a 2nd group order going on currently. See the thread http://www.venturerider.org/forum/showthread.php?t=79625
Sorry it took so long but the person went out of country and return sick for some time.
-
Sounds unimanious. I'll take it in for a check when I get my other car out of the shop.
-
Ya, but normally if is the rotors then one can feel it at the brake peddle.
This feels like the whole front suspension is shaking.
-
Now leave the freakin car alone
and get back to working on the bike.... Ya I know.
-
When I put my brakes on (94 Saturn) , I can feel front wheel shake. It is not a warped rotor pulsation but a definate shake. I don't know enough about front alignment but it seems to track pretty straight with a slight to the left.
I was told maybe a tie rod. Is a tie rod something that should be done at a shop?
Open to suggestions? No not trading it in on a new car. :-).
-
Hows does the saying go. "Close Enought For Government Work"
-
Jeff, This is off my wrecked 91 VR with cruise control.
The right handle bar got hit really bad. The housing broke apart.
What you need survived.
I can unsolider the wires and send you the black piece.
In that way the wires can be used as parts also.
It's yours just PM me your address.
Whats failed with your black piece?
-
What ever it is I will double it at least!
I want to take the back wheel off my 88 and do a complete lube of everything behind the engine.
I haven't looked yet but I'm hoping there is a procedure in the library.
Let us know if you find a procedure.
-
What does that look like? Or what is its function? Any picture?
-
If you go somewhere between Beatty NV and Tonopah NV, let me know and I can tell to by mile marker and the exact feet per police report where all the debree was. Lots of parts were not gathered from my 19 June 2012 accident.
Just kidding, but I hope to revisit that site and put a marker that I survived. Nearing 100% recover soon.
-
This was just a personal test. A couple of days ago I did a new thread and was unable to see it unless I went to my profile and did a Status.
So I did this test thread. I thnk all is working.
To All, Thank You this test is Concluded.
-
Please Read Two Posts Above This Post.
This Post Is Closed To Orders...
-
I wonder what would happen if I would have said this is not a test post.
-
If you are reading this for the 1st time, this order is Closed.
But there is a 2nd Group order currently open.
Please place your order on the below link.
-
Already getting requests for more patches before I've even received the 1st shipment.
So I will begin this new thread.
Please indicate the size and then the quantity. example...
9 " Qty = 1
The 2 below are new orders.
A1bummer
USA
11 “ Qty = 1
ChrisFrench
FRANCE
7 " Qty = 2
9 " Qty = 2
11 " Qty = 1
-
test
-
-
My next bike if there is one, will most likely not be a Yamaha...
-
89 VR also?
-
The patches have been made and they will be shipped out this week.
They will need to go thru Homeland Security.
I'll get them out to you ASAPly.
Thank You for your Patience.
Brian T.
-
I checked both my 91 and 89 VR and the speedo cable does not seem to be routed any where special, so to let it hang whereever it wants so to put less stress on the internal spinning cable.
-
The same thing happened to me a couple of years ago. I believe there is a separate round plastic guide the cable goes through near the lower triple T. I'll take a picture of it on my wrecked, and partially disassembled 91 VR.
-
Here is a couple of pictures.
I found the entire hinges and screw set. I'm thinking that if someone ever needs the entire set they probably should have some screws left over from their set so would not need all the screws.
It is your for the asking, just POM me your address.
I understand how you feel about not just going to the hardware store and finding just any screw that would fit. Just like me. No one would know but you and I would know.
;-)
-
To take the guessing out of it, could you post a picture of one of the other bolts.
Give the length and the mm head size.
and get back to working on the bike.... 
Wahoooo...The 1stGenCrownPatch has arrived.
in Venture and Venture Royale Tech Talk ('83 - '93)
Posted
Annie had previously told me to send hers to your address. All is good.