Jump to content

steve crossley

Expired Membership
  • Posts

    132
  • Joined

  • Last visited

Reputation

10 Good

1 Follower

Personal Information

  • Name
    steve crossley

location

  • Location
    eureka montana, United States

Converted

  • City
    eureka montana

Converted

  • Home Country
    United States

Converted

  • Interests
    gutair. rc aircraft. motorcycles
  • Bike Year and Model
    1986 venture royale...custom
  1. i just overhauled my 86 , i used pistons from an 2013 royal star venture . only diff. is a slight recess on piston top. not an problem.
  2. to turn the thing u had to move the handle bar side to side as both tracks turn the same speed.
  3. yep! not only did i see one but rode them and worked for a dealer that sold them back in the 60s. they wernt to bad on the flat land . the boss all most broke his thumb while going in and out of ditches when the handle bar made contact with the yoke on the sled with his thumb in the middle. such fun!
  4. had a 79 xs1100f about 5 years . sold it , still see it around . great ol, bike.
  5. I have had the joy of having my venture going on 18 years and 165.000 miles .its earned my trust many times over, and were not done yet!!
  6. if you have an 86 or an 02 you should have a spring and a thin shim that fit between the filter cup and filter. shim goes tween filter and spring.
  7. dont bother foolin around, just replace head bearings . it wont heal.
  8. sounds like 1 carb is way out of sync try a sync job and see if it goes away .
  9. they sell a small bracket that fits under the licence plate with 2 flat spots and some 2 sided tape to stick them on with , works very well . have been on for about 4 years now
  10. yep! i have the running/flashing brake lights they work fantastic. tailgaters will back off right now .best lighting bucks i have spent. have woke up many a driver who had there head some where else. ( wont say where) . u will like them!
  11. yep no spacers no air 7 inches 10 wt oil and still to harsh for this ol carcus.
×
×
  • Create New...