Ipleedthe5th Posted August 2, 2020 Share #1 Posted August 2, 2020 Hey all, So a few years ago a took a shot at prototyping and making an adapter plate to use an inexpensive and readily available Specter 8166 air filter for the first gen venture since the original filters are hard to find and the K&Ns are pricey. After 2 years of service with over 5k miles in all weathers from below freezing to well above 100 degrees and long duration of hot traffic idling I feel confident in putting it out there for the rest of the community. It has not affected the performance of my bike at all and has not warped or deformed since the day I put it on. See pictures for what it looks like and how it fits in. The part is 3D printed using PETG which handles the high temp and oil just fine (I even have PETG printed parts that have survived multiple years in my 87' Ford diesel engine that are in direct contact with heat and oil unlike this air filter plate) If you have any questions, would like one, or would even like to see if I can make other replacement/adaptive parts just shoot me a message. Link to comment Share on other sites More sharing options...
SpencerPJ Posted August 3, 2020 Share #2 Posted August 3, 2020 looks good Link to comment Share on other sites More sharing options...
cimmer Posted August 3, 2020 Share #3 Posted August 3, 2020 What kind of cost are you talking for the adapter plate? Thanks Rick F. Link to comment Share on other sites More sharing options...
Ipleedthe5th Posted August 3, 2020 Author Share #4 Posted August 3, 2020 What kind of cost are you talking for the adapter plate? Thanks Rick F. I was thinking $30 + shipping and I'll back them up with a 2 year warranty. Link to comment Share on other sites More sharing options...
Not That Guy Posted August 20, 2020 Share #5 Posted August 20, 2020 Got mine just now. The Heap is still up on the lift(rectifer upgrade) and will be installing next week. Thanks Zach. 1 Link to comment Share on other sites More sharing options...
Ipleedthe5th Posted April 13, 2021 Author Share #6 Posted April 13, 2021 UPDATE!!!!! Over 6,000 miles, 30-110 degree rides and its still going strong! I also wanted to announce that I have simplified being able to get one of these through my new Etsy shop. Anyone whose interested can purchase it here ( https://www.etsy.com/listing/872563342/first-gen83-85-yamaha-venture-specter? ) and it still comes with the 2 year warranty! Happy Riding! Link to comment Share on other sites More sharing options...
Abnorml Posted September 3, 2022 Share #7 Posted September 3, 2022 On 4/13/2021 at 5:47 PM, Ipleedthe5th said: UPDATE!!!!! Over 6,000 miles, 30-110 degree rides and its still going strong! I also wanted to announce that I have simplified being able to get one of these through my new Etsy shop. Anyone whose interested can purchase it here ( https://www.etsy.com/listing/872563342/first-gen83-85-yamaha-venture-specter? ) and it still comes with the 2 year warranty! Happy Riding! So I know this is an older thread, but the etsy link is dead. Are you still selling this kit? would yu consider a personal use license for the STL file? (I have a 3d printer) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now