Royal Venturer Posted May 10, 2019 Share #1 Posted May 10, 2019 I bought a Caltrix (part #PP114) 2005 XVZ13TFT fuel pump off amazon. Listed as the same one advertised on the classifieds here. The inlet and outlet pipes for hose connection are 2mm larger than the one I removed off of bike. Called Yamaha (part #4NK-13907-00-00) They want $340 for pump, out rage us. In the process of contacting Caltrix, getting run around. Has anybody bought the one here that is a Ebay link have successful fit? Link to comment Share on other sites More sharing options...
Drews Posted May 10, 2019 Share #2 Posted May 10, 2019 BE CARFFUL WITH THOSE CHEAP FUEL PUMPS THEY HAVE NO CHECK VALVE AND WILL HYDROCK Link to comment Share on other sites More sharing options...
Drews Posted May 10, 2019 Share #3 Posted May 10, 2019 LAST TIME I USED A FACET 40171/ss171 IT HAS POSITIVE SHUT OFF OR PUT NEW POINTS IN YOUR OLD PUMP Link to comment Share on other sites More sharing options...
Drews Posted May 10, 2019 Share #4 Posted May 10, 2019 I PAYED $75.00 ON EBAY FOR FACET BUT BONGO BOB FOUND A PLACE FOR $45.00 OR $50.00 Link to comment Share on other sites More sharing options...
grubsie Posted May 10, 2019 Share #5 Posted May 10, 2019 (edited) I PAYED $75.00 ON EBAY FOR FACET BUT BONGO BOB FOUND A PLACE FOR $45.00 OR $50.00 Here's the upgraded version of 40171. https://www.pegasusautoracing.com/productdetails.asp?RecID=7550 I used the MR Gasket 42's that I got at Autozone, So far, So good. There's a writeup in the tech section on how to set it up from "djh3". He used the supplied fuel filter and made a custom mounting bracket. I didn't use the filter and extended the inlet tube tip so it was very close to lining up with the outlet tip. This allowed me to use the stock mounting bracket. I also relocated a new clear fuel filter to under the seat between the gas tank and battery for easier access. Had to pick up some 5/16 fuel line for it. Here's the writeup. https://www.venturerider.org/forum/showthread.php?86265-Mr-Gasket-Fuel-Pump-Conversion Edited May 10, 2019 by grubsie Link to comment Share on other sites More sharing options...
Royal Venturer Posted May 10, 2019 Author Share #6 Posted May 10, 2019 Here's the upgraded version of 40171. https://www.pegasusautoracing.com/productdetails.asp?RecID=7550 I used the MR Gasket 42's that I got at Autozone, So far, So good. There's a writeup in the tech section on how to set it up from "djh3". He used the supplied fuel filter and made a custom mounting bracket. I didn't use the filter and extended the inlet tube tip so it was very close to lining up with the outlet tip. This allowed me to use the stock mounting bracket. I also relocated a new clear fuel filter to under the seat between the gas tank and battery for easier access. Had to pick up some 5/16 fuel line for it. Here's the writeup. https://www.venturerider.org/forum/showthread.php?86265-Mr-Gasket-Fuel-Pump-Conversion Very nice, thanks for the pics, and tutorial!!! Link to comment Share on other sites More sharing options...
djh3 Posted May 11, 2019 Share #7 Posted May 11, 2019 Yup I used the "ford carb" filter that was screw in type supplied and also a clear glass replaceable type bullet filter up by seat. Never had a problem with the Mr Gasket 42. Link to comment Share on other sites More sharing options...
grubsie Posted May 11, 2019 Share #8 Posted May 11, 2019 Yup I used the "ford carb" filter that was screw in type supplied and also a clear glass replaceable type bullet filter up by seat. Never had a problem with the Mr Gasket 42. 2 Filters! You had the purest gas to ever enter the combustion chambers of a RSV. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now