Guest RGOYEA Posted January 13, 2008 Share #1 Posted January 13, 2008 Can anyone tell me an easy or is there something tricky about changing handlebar grips on an 06 Venture. I would like to put on after market but can't get the originals off. Any ideas would be appreciated - Thanks Ray Link to comment Share on other sites More sharing options...
utadventure Posted January 13, 2008 Share #2 Posted January 13, 2008 I had the same question when I was changing mine. My neighbor told me to take a utility knife and just split the old grip and open it up and it would come right off. He was right!! Dave Link to comment Share on other sites More sharing options...
Guest RGOYEA Posted January 13, 2008 Share #3 Posted January 13, 2008 Thanks everbody for the info - It was the weights that I had a problem with but will try the idea with the strap wrench Information much appreciated Ray Windsor - Ontario Link to comment Share on other sites More sharing options...
mm482 Posted January 13, 2008 Share #4 Posted January 13, 2008 Look carefully at the end of the bar weight. You will see a small plug, pop it out with a sharp knift blade. There is a allen screw in the end of the weight holding it on. Earl 86 VR 00 RSV Link to comment Share on other sites More sharing options...
Squeeze Posted January 13, 2008 Share #5 Posted January 13, 2008 After you dismounted the Weight, start your Compressor and plug on the Airgun. Use a Screwdriver to lift a small Part of the Grip and blow the Air between The Grip and the Handlebar. You will have the Grip undone with three or four Turns on the Grip. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now