dingy Posted February 23, 2011 Share #1 Posted February 23, 2011 Have the motor out of the scooter do do a few enhancements on it and had a problem last night. I was able to get 15 of the 16 head studs out of the block, and literally the last one I went to do would not budge with a double nut setup. Put Red Loctite on nuts and let it cure over night, and still wasn't budging. A little more torque with a pipe wrench and it let go. I was getting concerned. Never used Loctite to disassemble something before. Gary Link to comment Share on other sites More sharing options...
ragtop69gs Posted February 23, 2011 Share #2 Posted February 23, 2011 Yep, that is a new use. Now you need HEAT to get that red death coated stuff apart Putting in stronger rods that will handle the 200 shot of nitrous ? Link to comment Share on other sites More sharing options...
dingy Posted February 23, 2011 Author Share #3 Posted February 23, 2011 Yep, that is a new use. Now you need HEAT to get that red death coated stuff apart Putting in stronger rods that will handle the 200 shot of nitrous ? Actually,the nuts came off the stud without heat. I wouldn't have to pull head studs to change rods ! ! Gary Link to comment Share on other sites More sharing options...
ragtop69gs Posted February 23, 2011 Share #4 Posted February 23, 2011 SO, you're not denying the nitrous eh? I guess I won't be racing you for Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now