kbran Posted July 17, 2010 Share #1 Posted July 17, 2010 Anyone have the driver intercom cable harness they can part with. Tried soldering a new plug on the end where it sits on the tank but just can't get a good solder on those little wires. If someone has one to part out please let me know and how much. Oh it's for an 86. Link to comment Share on other sites More sharing options...
Owen Posted July 17, 2010 Share #2 Posted July 17, 2010 I don't have one or I would send it to ya... if you make it here for my MD I will fix it for you! Link to comment Share on other sites More sharing options...
steve crossley Posted July 17, 2010 Share #3 Posted July 17, 2010 i think skydoc 17 might have one or two as i did some trading with him . there were two new ones sent to him if he still has them . Link to comment Share on other sites More sharing options...
Condor Posted July 17, 2010 Share #4 Posted July 17, 2010 Anyone have the driver intercom cable harness they can part with. Tried soldering a new plug on the end where it sits on the tank but just can't get a good solder on those little wires. If someone has one to part out please let me know and how much. Oh it's for an 86. Are you talking about the cable that comes from the AMP to the top of the tank? If so I have one off a '84 that may work... The headset female plug..the one on the tank end... is a 5-pin all on one half. I picked it up off Ebay a couple of years ago, and I don't think I'll need it. LMK. Link to comment Share on other sites More sharing options...
kbran Posted July 17, 2010 Author Share #5 Posted July 17, 2010 Are you talking about the cable that comes from the AMP to the top of the tank? If so I have one off a '84 that may work... The headset female plug..the one on the tank end... is a 5-pin all on one half. I picked it up off Ebay a couple of years ago, and I don't think I'll need it. LMK. PM sent. Link to comment Share on other sites More sharing options...
kbran Posted July 17, 2010 Author Share #6 Posted July 17, 2010 I don't have one or I would send it to ya... if you make it here for my MD I will fix it for you! Thanks for the offer, wish we could make it but have to work that weekend. Link to comment Share on other sites More sharing options...
painterman67 Posted July 18, 2010 Share #7 Posted July 18, 2010 here you go....Both front and rear new for 51 bucks plus shipping. http://www.sierra-mc.com/proddetail.asp?prod=JM%2DYV%2D41 David Link to comment Share on other sites More sharing options...
GigaWhiskey Posted July 19, 2010 Share #8 Posted July 19, 2010 here you go....Both front and rear new for 51 bucks plus shipping. http://www.sierra-mc.com/proddetail.asp?prod=JM%2DYV%2D41 David Took the words right outta my fingers. Link to comment Share on other sites More sharing options...
Leeway Posted July 19, 2010 Share #9 Posted July 19, 2010 here you go....Both front and rear new for 51 bucks plus shipping.http://www.sierra-mc.com/proddetail.asp?prod=JM%2DYV%2D41 David Thanks for the link, that is sweet deal. Link to comment Share on other sites More sharing options...
Condor Posted July 19, 2010 Share #10 Posted July 19, 2010 Thanks for the link, that is sweet deal. Just make sure they'll fit a 1stGen..... Nice lookin' '91 BTW... Link to comment Share on other sites More sharing options...
Rocket Posted July 19, 2010 Share #11 Posted July 19, 2010 Just make sure they'll fit a 1stGen..... Nice lookin' '91 BTW... I use this set on my 83......... Link to comment Share on other sites More sharing options...
Condor Posted July 20, 2010 Share #12 Posted July 20, 2010 I use this set on my 83......... So the '97 and the 83 take the same cables?? Interesting. Actually if that's the case and they are built for the 1stGens, the catagory at the top is sorta confusing as it states 1997 and older.... Link to comment Share on other sites More sharing options...
Rocket Posted July 20, 2010 Share #13 Posted July 20, 2010 So the '97 and the 83 take the same cables?? Interesting. Actually if that's the case and they are built for the 1stGens, the catagory at the top is sorta confusing as it states 1997 and older.... Jack consider this, the 2nd gens are newer than 97........ Also I was previously informed of this set, by the Prez of J & M himself, before buying it 4 yrs ago. Link to comment Share on other sites More sharing options...
Condor Posted July 20, 2010 Share #14 Posted July 20, 2010 Jack consider this, the 2nd gens are newer than 97........ Also I was previously informed of this set, by the Prez of J & M himself, before buying it 4 yrs ago. And Rocket.... Consider this.... the '97 ain't a 1stGen...... Not quite sure what it is, but it ain't a 1st..... Link to comment Share on other sites More sharing options...
Rocket Posted July 20, 2010 Share #15 Posted July 20, 2010 And Rocket.... Consider this.... the '97 ain't a 1stGen...... Not quite sure what it is, but it ain't a 1st..... Probably a typo, on the web page. Link to comment Share on other sites More sharing options...
Condor Posted July 20, 2010 Share #16 Posted July 20, 2010 Probably a typo, on the web page. Maybe you should call them about it??? Link to comment Share on other sites More sharing options...
jasonm. Posted July 20, 2010 Share #17 Posted July 20, 2010 The intercom cable is JUST a mouse PS2 cable minus one pin and a 5 pin din at the other. I have the schematic from Yamaha. I made my own. Using $10 mouse ext. cable and 5 pin connector $3. Link to comment Share on other sites More sharing options...
Evan Posted July 21, 2010 Share #18 Posted July 21, 2010 The intercom cable is JUST a mouse PS2 cable minus one pin and a 5 pin din at the other. I have the schematic from Yamaha. I made my own. Using $10 mouse ext. cable and 5 pin connector $3. Interesting Jason. I have an old cable that I would like to fix by changing the 5 pin din connector. Where can I find a connector? Link to comment Share on other sites More sharing options...
kbran Posted July 29, 2010 Author Share #19 Posted July 29, 2010 I want to thank Condor for sending the cable he had. It was the wrong one, missing the flat connector that goes to the wiring harness, but he graciously took it back. I ordered one from pinwall on ebay and it is the correct cable for the 86 up. Here is a pic of the right one on the right. Again thanks Jack for helping me out. http://pinwallcycle.com/ebay/bike2353/316.jpg Link to comment Share on other sites More sharing options...
jasonm. Posted July 29, 2010 Share #20 Posted July 29, 2010 Interesting Jason. I have an old cable that I would like to fix by changing the 5 pin din connector. Where can I find a connector? Radio shack sells both the standard 5 pin din fits the bike and the mini 5/6 pin connector aka PS2 fits the helmet. The mouse extension cables are available everywhere they sell computers... Note: they are NOT coiled / spring type. And look a lot like the previous post. Mine are white...can also find black if you look. Link to comment Share on other sites More sharing options...
kbran Posted July 30, 2010 Author Share #21 Posted July 30, 2010 Interesting Jason. I have an old cable that I would like to fix by changing the 5 pin din connector. Where can I find a connector? Here is one place http://www.showmecables.com/DIN-Jack.html Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now