scooter45 Posted November 13, 2009 Share #1 Posted November 13, 2009 The part that holds the lid up is loose, The top screw you can get to but how do you get to the bottom screw Link to comment Share on other sites More sharing options...
Yamaman Posted November 13, 2009 Share #2 Posted November 13, 2009 I hope we get some replies on this. I have the same problem. Link to comment Share on other sites More sharing options...
rod Posted November 14, 2009 Share #3 Posted November 14, 2009 Mine fell off so I just removed the whole thing. Rod Link to comment Share on other sites More sharing options...
V7Goose Posted November 14, 2009 Share #4 Posted November 14, 2009 You have to pop the circlip off the pin that holds the strut to the lid. With the strut loose, you can pivot it to the rear and access the other screws. Of course, you have to take the plastic cover off the bottom end, too (just one screw for that). Goose Link to comment Share on other sites More sharing options...
scooter45 Posted November 14, 2009 Author Share #5 Posted November 14, 2009 Hope I can figure it out Link to comment Share on other sites More sharing options...
davecb Posted November 15, 2009 Share #6 Posted November 15, 2009 You have to pop the circlip off the pin that holds the strut to the lid. With the strut loose, you can pivot it to the rear and access the other screws. Of course, you have to take the plastic cover off the bottom end, too (just one screw for that). Goose Yup, you gotta take everything apart to get to the screw and then you have to be careful on how much you tighten it. If to tight, it won't swing back up to reinstall everything. Just keep playing with it and you will get it right.... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now