MasterGuns Posted August 24, 2009 Share #1 Posted August 24, 2009 The past weekend I wanted to replace the clutch slave cylinder and rebuild the clutch master cylinder. Even though I thought replacing the slave would be the most difficult, that went pretty smoothly and only took about 1 hour. I may have been lucky. So then I started with the master cylinder. HOW DO YOU REMOVE THAT DOGGONE LOCK RING? I then cut grass for the rest of the day. Thanks Link to comment Share on other sites More sharing options...
skydoc_17 Posted August 24, 2009 Share #2 Posted August 24, 2009 Hey herb, You are going to need a GOOD pair of snap ring pliers to get that puppy out. I bought a set at Sears amd it went pretty well for me. Keep track of how the parts come out of the master, if you don't get them back in properly, the thing will never work. Mine had old brake fluid all around it and it was a bear cleaning all of that off to get to the snap ring. You can PM me if you need more info. Earl Link to comment Share on other sites More sharing options...
Yammer Dan Posted August 24, 2009 Share #3 Posted August 24, 2009 I got a couple that I at least need to clean up. grabbed a set of Pliers at Harbor Freight seem OK Several different tips with them. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now