Search the Community
Showing results for tags 'r/g'.
Found 1 result
-
Hope someone can help with this issue. Two weeks ago my speedometer and all other digital gages quit too. Took apart and checked for power. I noticed that if I disconnected the r/g continuous 12 volt power source wire and then turned on ignition key, all gages would work. And if I reconnected the r/g wire all was fine. But as soon as I turn off key and turn on again with r/g wire connected my gages will not work. Disconnect and turn on key all is fine. So I thought I would connect a toggle switch on the 12v r/g wire and test out on the road. Ok now hear is where the big problem is. I decided to go to gas station to make sure gas gage would work. Started down the road and ran thru first and second gears no problem. Started ramping up in third and when I got to approx. 45 mph the motor just fell on its face. It acted like u just cut off the power. Forth and fifth forget it it will not hardly run at all. Anything over 45 from third gear on will not run. The bike will run fine up to as fast as 65mph in second and not flinch. Shift to third and it will lay down til u get back down to about 40mph and u can cruise there and slower all day long. BTY. Before I started messing with the Speedometer the bike ran like a scalded dog,