motorbiketim

Thanks guys, I'm going to drain out a little oil because I tend to keep it full to the top of the slight glass, and then bleed the clutch. If she still slips then we'll try sanding the metal plates again. This is a great bike for a compulsive tinkerer.

I bought my 83 about 18 months ago and the clutch has allways slipped if I accellerate hard. Last winter I took the clutch a part and the disc looked OK so I ordered some barnette springs and put her back together. This helped a lot but it still slips at higher speeds and higher RPM's. I assume that I will need to just bite the bullet and replace the hole clutch but was hoping for any advice such as where is a good place to get these parts and, is this a common problem with these bikes? Thanks and sorry if this is a reduntent topic. Tim