clav_guy Posted May 25, 2007 Share #1 Posted May 25, 2007 Hi Can anyone tell me how to remove the front (driver's) seat from a 2006 RSV???? Thanks in advance SpEEd Safely CG Link to comment Share on other sites More sharing options...
hig4s Posted May 25, 2007 Share #2 Posted May 25, 2007 There are two long hex nuts under the front of the seat.. Left side is very close to the chrome on the top of the cylinder so you can't use a socket on that side, need an open end wrench.. 10mm I think. Once you have the nuts off, lift up, slide forward a couple inches and lift off. Getting the tab on the back of the seat to slide back into its spot when reinstalling can be a pain. Link to comment Share on other sites More sharing options...
stardbog Posted May 25, 2007 Share #3 Posted May 25, 2007 There are 2 bolts under seat. you need 10 mm wrench Link to comment Share on other sites More sharing options...
sarges46 Posted May 25, 2007 Share #4 Posted May 25, 2007 And if you drop one of those nuts they go right to the middle of the engine and are lost forever! I am now riding with no.....er......nuts holding my seat and that is no problem! Now get the laughing done with folks! Link to comment Share on other sites More sharing options...
BamaVenture06 Posted May 25, 2007 Share #5 Posted May 25, 2007 And if you drop one of those nuts they go right to the middle of the engine and are lost forever! I am now riding with no.....er......nuts holding my seat and that is no problem! Now get the laughing done with folks! BwaHahahaha!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now