Pasta Burner Posted August 30, 2021 Share #1 Posted August 30, 2021 I took a video rather than trying to explain. I’m not sure when this started but I Definitely didn’t notice it this bad before this morning on my way to work. Something to note, a few weeks ago the cables on the right side (not sure which one as wasn’t watching it) caught the head of the cigarette lighter and ripped it apart during a parking lot maneuver. Question is, what part / parts should I be fixing or replacing? IMG_0336.MOV Link to comment Share on other sites More sharing options...
luvmy40 Posted August 30, 2021 Share #2 Posted August 30, 2021 Can't see your vid PB Link to comment Share on other sites More sharing options...
Pasta Burner Posted August 30, 2021 Author Share #3 Posted August 30, 2021 @luvmy40 any better now? My wifi is being dumb. Link to comment Share on other sites More sharing options...
Pasta Burner Posted August 30, 2021 Author Share #4 Posted August 30, 2021 (edited) Ok found the problem the white plastic piece finally had enough apparently and the cable was just sitting inside the housing. (Put back in place for the pic.) According to this IPB looks like it’s part of the grip assembly item 19. Or is there an insert I can buy? https://www.youngpowersportslayton.com/oempartfinder#/Yamaha/XVZ13DT_-_1987/HANDLEBAR_CABLE/7f27add3-8aa1-4fc3-ac41-cc44b1eded4d/f86175b4-7082-4ed0-8c30-c8fb2fee8a8b/y Edited August 30, 2021 by Pasta Burner Link to comment Share on other sites More sharing options...
luvmy40 Posted August 30, 2021 Share #5 Posted August 30, 2021 Time for some ISO Grips! Still can't see the vid you linked. Link to comment Share on other sites More sharing options...
Pasta Burner Posted August 31, 2021 Author Share #6 Posted August 31, 2021 (edited) 51 minutes ago, luvmy40 said: Time for some ISO Grips! Still can't see the vid you linked. ISO grip? I’m gonna have to look into that. For now, my redneck engineering prevails. Zip tie and fluid film. IMG_0336.MOV Edited August 31, 2021 by Pasta Burner Link to comment Share on other sites More sharing options...
luvmy40 Posted August 31, 2021 Share #7 Posted August 31, 2021 https://www.jpcycles.com/product/163-415/kuryakyn-chrome-iso-grips?utm_source=google&utm_medium=cpc&utm_campaign=PLA-Kuryakyn-Products&utm_id=google_10878558632_107905977035_457786789659_pla-940229083149_c__163-415_Cj0KCQjwg7KJBhDyARIsAHrAXaHUzjPwWpG2IvIXVs9QmeEOjg74I-_o915Ez17Vg-aEpAZxbnLO-QgaAoPkEALw_wcB&utm_term=940229083149&gclid=Cj0KCQjwg7KJBhDyARIsAHrAXaHUzjPwWpG2IvIXVs9QmeEOjg74I-_o915Ez17Vg-aEpAZxbnLO-QgaAoPkEALw_wcB Spend the extra$ and get the throttle boss with them. You don't have to buy Kuryakyn, there are many copies that perform just as well. I've had both and could not detect any difference in feel or performance. I can tell you the design is spectacular and I will never own a bike that does not have these grips. 1 Link to comment Share on other sites More sharing options...
Pasta Burner Posted August 31, 2021 Author Share #8 Posted August 31, 2021 58 minutes ago, luvmy40 said: https://www.jpcycles.com/product/163-415/kuryakyn-chrome-iso-grips?utm_source=google&utm_medium=cpc&utm_campaign=PLA-Kuryakyn-Products&utm_id=google_10878558632_107905977035_457786789659_pla-940229083149_c__163-415_Cj0KCQjwg7KJBhDyARIsAHrAXaHUzjPwWpG2IvIXVs9QmeEOjg74I-_o915Ez17Vg-aEpAZxbnLO-QgaAoPkEALw_wcB&utm_term=940229083149&gclid=Cj0KCQjwg7KJBhDyARIsAHrAXaHUzjPwWpG2IvIXVs9QmeEOjg74I-_o915Ez17Vg-aEpAZxbnLO-QgaAoPkEALw_wcB Spend the extra$ and get the throttle boss with them. You don't have to buy Kuryakyn, there are many copies that perform just as well. I've had both and could not detect any difference in feel or performance. I can tell you the design is spectacular and I will never own a bike that does not have these grips. If I’m gonna replace the grips I’d like to do so with some heated ones. I Did a search on google for ISO and just gotta figure out what fits. Link to comment Share on other sites More sharing options...
Pasta Burner Posted September 8, 2021 Author Share #9 Posted September 8, 2021 @luvmy40 where do you have the throttle boss positioned? The Avon grips I bought came with it attached but the stock location seems to be too low to be of any use. I’m thinking I should rotate it up so it’s pointing about 45 degrees. Link to comment Share on other sites More sharing options...
luvmy40 Posted September 8, 2021 Share #10 Posted September 8, 2021 It's a trial and error kind of thing. I'd say setting the throttle boss at about 10 deg. up from parallel to the ground is good starting point. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now