Air boxes question

[Skid]

Can you get into the air boxes without removing the lower fairing or any other parts?

[Condor]

Gotta remove the fairings to get to the front screws. I imagine it could be done, but it's a PITA... Besides it's not that hard, and makes life so much easier...

[eusa1]

loosen the clamp at the back of the air boxes to hose, then take 1 10 mm bolt out above and below air box and take the entire boxes to the bench to remove 6 screws from each

[djh3]

I use the long phillips screw driver for adjusting carbs, and loosen the clamp at back connecting to tube. then it's 2 10mm bolts as mentioned. one you can go pretty straight inot get, the other I have to use a universal on. There is more screws holding the box's together than there is to get them off.

[ACE50]

I've never taken the lower fairings to remove air boxes. Many times. Flex extension for front 10mm. No problem at all.

[eusa1]

yes 2, as stated 1 above and 1 below air box or would that be 4 counting both sides?