royal rider45 Posted May 28, 2013 Share #1 Posted May 28, 2013 Just started my lowering of my 05 RSTD yesterday..Lowered the back 1.5" but its raining today to remove the front forks to install the Baron's Kit. Had new rubber installed as well hopefully the Kenda Kruz tires will be better than the other set I had on they were Bridgestones...very noisy in curves. Have some pictures to post on the build. After the lowering will also install Flanders handlebars and Kuryakyn Grips with weight ends. Link to comment Share on other sites More sharing options...
FuzzyRSTD Posted May 28, 2013 Share #2 Posted May 28, 2013 (edited) Well looks like you are doing a complete removal of everything. Wow, kinda surprised unless you are also doing other things as well. I am thinking about the barons lowering idea also. Hope it all works out for you. A lot if good information here to help you on the way. I like the Avon Venom tires myself. Good tire life and very good handling in dry and wet conditions. Would be a good time to have graphics added to your fenders if you are doing that. I would like to have some added to mine one of these winters. I have a 2007 RSTD. I like the pictures. Keep us informed of your progress and things to watch for on a lowering rear project. http://www.venturerider.org/forum/showthread.php?t=69147 I did the Flanders bars and stainless cables from, well shucks, can not remember right now. They are located in Cincinnati Ohio. Very good people to deal with. I really like the extra pull back they gave me. http://www.venturerider.org/forum/showthread.php?t=67699 Thanks, Fuzzy. Edited May 28, 2013 by FuzzyRSTD Link to comment Share on other sites More sharing options...
royal rider45 Posted May 28, 2013 Author Share #3 Posted May 28, 2013 Well its been raining off and on today. Was able to reinstall the rear tire and fender when ever is stopped. Tomorrow will tackle the front fork removal and disassembly. Link to comment Share on other sites More sharing options...
royal rider45 Posted May 29, 2013 Author Share #4 Posted May 29, 2013 DONE!!!! Bike lowered. New Tires front and back. New Flanders handlebars and grips. Complete bike polish.....Took it out for a spin down the 401 highway...must say very smooth and comfortable. Time for BEER!!! Link to comment Share on other sites More sharing options...
slowrollwv Posted May 30, 2013 Share #5 Posted May 30, 2013 When you did the lowering did you shorten your kickstand? I have talked to others that have done it and they had to shorten the stand also. Link to comment Share on other sites More sharing options...
royal rider45 Posted May 30, 2013 Author Share #6 Posted May 30, 2013 No I did not shorten the stand. but I did notice the bike is not leaning as much as before. right now I don't have any issues with it...maybe later I might cut and weld it up. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now