GeorgeS Posted April 8, 2013 #1 Posted April 8, 2013 OK, question: I have a good , spare fuel pump from my 89 ( 1st gen, now sold ) . Am wondering if it will work as a Spare, for the new 08 2nd gen bike. ?? OK, 2nd gen P/N is 4NK-13907-00-00 and I went to the parts fitch, for 1st gen bikes, and the Fuel Pump, is no longer listed ??? Interesting, ??? Anyway, has anybody used a 1st Gen Fuel Pump, on a 2nd gen bike?? No big deal, just wondering if I should carry the extra pump as an " On the Road " Spare, just in case its needed ?? Any thoughs on this will be appreciated, :detective: Been " Raining " in Seattle for 3 days now !!!! :confused24::confused24::depressed::depressed:
Peder_y2k Posted April 8, 2013 #2 Posted April 8, 2013 FWIW, I carry a generic automotive electric fuel pump with wire connects and extra fuel hose w/ clamps. This pump produces some 3-4 psi fluid pressure and is perfect for the 4 carbs. It also produces an adequate flow rate for high power demands in mountain pass two-up riding with full bags. Gravity feed will also work to keep the carbs full.... just an idea. -Pete, in Tacoma WA USA '83,88
dingy Posted April 9, 2013 #4 Posted April 9, 2013 Linked below is a thread that shows a 1st gen pump in a RSV frame. http://www.venturerider.org/forum/showthread.php?t=75778 Gary
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now